NORYL™ Resin GFN1720 - Europe

Want to keep this datasheet? Save it now in your required format

Description

NORYL™ GFN1720 resin is a 20% glass reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This injection moldable grade was developed for high heat applications and exhibits a good balance of heat resistance, strrength, and electrical performance. NORYL GFN1720 resin is an excellent candidate for applications requirinng electrically insulating properties, such as ignition coils and bobbins.

This material data has been provided by Sabic.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.24 g/cm³

Show Supplier Material materials with Density of 1.24 g/cm³

ISO 1183

Limiting oxygen index

23.0 °C

23 %

Show Supplier Material materials with Limiting oxygen index of 23 %

Moisture absorption

23.0 °C

0.06 %

Show Supplier Material materials with Moisture absorption of 0.06 %

ISO 62 | (23°C / 50% RH)

Relative density

23.0 °C

1.24 [-]

Show Supplier Material materials with Relative density of 1.24 [-]

ASTM D 792 |

Water absorption

23.0 °C

0.15 %

Show Supplier Material materials with Water absorption of 0.15 %

ISO 62-1 | (23°C/saturated)

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

6 GPa

Show Supplier Material materials with Elastic modulus of 6 GPa

ISO 527 | 1 mm/min

Elongation

23.0 °C

2 %

Show Supplier Material materials with Elongation of 2 %

ISO 527 | break, 5 mm/min

Flexural modulus

23.0 °C

4.5 GPa

Show Supplier Material materials with Flexural modulus of 4.5 GPa

ISO 178 | 2 mm/min

Flexural strength

23.0 °C

135 MPa

Show Supplier Material materials with Flexural strength of 135 MPa

ISO 178 | break, 2 mm/min

Hardness, Ball Indentation

23.0 °C

100 MPa

Show Supplier Material materials with Hardness, Ball Indentation of 100 MPa

ISO 2039-1 | H358/30

Impact strength, Charpy unnotched

23.0 °C

25 kJ/m²

Show Supplier Material materials with Impact strength, Charpy unnotched of 25 kJ/m²

ISO 179/1eU | Unnotch Edgew 80*10*4 sp=62mm, -30°C

Impact strength, Izod notched

23.0 °C

60 kJ/m²

Show Supplier Material materials with Impact strength, Izod notched of 60 kJ/m²

ASTM D 256 | notched, 23°C

Impact strength, Izod notched, ASTM

23.0 °C

60 J/m

Show Supplier Material materials with Impact strength, Izod notched, ASTM of 60 J/m

ASTM D 256

Impact strength, Izod unnotched

23.0 °C

25 kJ/m²

Show Supplier Material materials with Impact strength, Izod unnotched of 25 kJ/m²

ISO 180/1U | unnotched 80*10*4, -30°C

Instrumented Impact, Total Energy

23.0 °C

14 J

Show Supplier Material materials with Instrumented Impact, Total Energy of 14 J

ASTM D 3763 | 23°C

Taber Abrasion

23.0 °C

45 mg/1000cy

Show Supplier Material materials with Taber Abrasion of 45 mg/1000cy

SABIC method | CS-17, 1 kg

Tensile strength

23.0 °C

90 MPa

Show Supplier Material materials with Tensile strength of 90 MPa

ISO 527 | yield, 5 mm/min

Thermal

PropertyTemperatureValueComment

Ball Pressure Test

nan

IEC 60695-10-2 | 125°C +/- 2°C

Ball pressure temperature

165 °C

Show Supplier Material materials with Ball pressure temperature of 165 °C

IEC 60695-10-2 | approximate maximum

Coefficient of thermal expansion

23.0 °C

3E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 3E-5 1/K

ISO 11359-2 | 23°C to 80°C

Coefficient of thermal expansion, transverse

23.0 °C

7E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion, transverse of 7E-5 1/K

ISO 11359-2 | 23°C to 80°C

Heat deflection temperature, 0.45 MPa

170 °C

Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 170 °C

ISO 75/Be | Edgew 120*10*4 sp=100mm

Heat deflection temperature, 1.80 MPa

160 °C

Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 160 °C

ISO 75/Ae | Edgew 120*10*4 sp=100mm

Thermal conductivity

23.0 °C

0.26 W/(m·K)

Show Supplier Material materials with Thermal conductivity of 0.26 W/(m·K)

ISO 8302

Vicat softening temperature

180 °C

Show Supplier Material materials with Vicat softening temperature of 180 °C

ISO 306 | Rate B/120

Flammability

Glow Wire Flammability Index 960°C, passes at: 3.2mm IEC 60695-2-12 <br> Glow Wire Flammability Index 960°C, passes at: 3.2mm IEC 60695-2-12

Electrical

PropertyTemperatureValueComment

Comparative tracking index

23.0 °C

200 V

Show Supplier Material materials with Comparative tracking index of 200 V

IEC 60112 |

Dielectric constant, 1MHz

23.0 °C

2.6 [-]

Show Supplier Material materials with Dielectric constant, 1MHz of 2.6 [-]

IEC 60250

Dielectric constant, 60Hz

23.0 °C

2.7 [-]

Show Supplier Material materials with Dielectric constant, 60Hz of 2.7 [-]

IEC 60250 | 50/60 Hz

Dielectric strength

23.0 °C

26 kV/mm

Show Supplier Material materials with Dielectric strength of 26 kV/mm

IEC 60243-1 | in oil, 1.6 mm

Dissipation factor, 1MHz

23.0 °C

2E-3 [-]

Show Supplier Material materials with Dissipation factor, 1MHz of 2E-3 [-]

IEC 60250

Dissipation factor, 50Hz

23.0 °C

6E-3 [-]

Show Supplier Material materials with Dissipation factor, 50Hz of 6E-3 [-]

IEC 60250 | 50/60 Hz

Sheet resistivity, ROA

23.0 °C

1.00E+15 Ω

Show Supplier Material materials with Sheet resistivity, ROA of 1.00E+15 Ω

>, IEC 60093

Volume resistivity

23.0 °C

1.00E+15 Ω·cm

Show Supplier Material materials with Volume resistivity of 1.00E+15 Ω·cm

IEC 60093

Rheological Properties

PropertyTemperatureValueComment

Melt mass-flow rate

4.5 g/10min

Show Supplier Material materials with Melt mass-flow rate of 4.5 g/10min

ASTM D 1238 | 300°C/5.0 kgf

Melt volume-flow rate

11 cm³/10min

Show Supplier Material materials with Melt volume-flow rate of 11 cm³/10min

ISO 1133 | MVR at 300°C/10.0 kg

Shrinkage

23.0 °C

0.2 %

Show Supplier Material materials with Shrinkage of 0.2 %

SABIC method | on tensile bar

Technological properties

Property
Application areas

Freezer, Electrical, EV/HEV Battery, Industrial Material Handling, Heavy Vehicles, Hot Water System, Electronic Components, Enclosures, Auto Aftermarket, Cooking Range, Washing Machine, Underhood, Wiring Devices, Wireless Communications, Pump, Ignition System, Microwave Oven, Motorcycle, Personal Computing

Availability

Europe

Features

Hydrolytic Stability, Low Warpage, Structural

Processing methods

Mold Temperature: 80 to 120.0°C
Drying Time: 2 to 4.0hrs
Middle - Zone 2 Temperature: 290 to 310.0°C
Nozzle Temperature: 290 to 310.0°C
Melt Temperature: 290 to 330.0°C
Rear - Zone 1 Temperature: 270 to 290.0°C
Drying Temperature: 110 to 120.0°C
Front - Zone 3 Temperature: 310 to 330.0°C
Hopper Temperature: 60 to 80.0°C

Supplier Disclaimer

While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.