NORYL™ Resin GFN1 - Asia

Want to keep this datasheet? Save it now in your required format

Description

NORYL™ GFN1 resin is a 10% glass reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This general-purpose injection moldable grade exhibits very low moisture absorption, high strength, hydrolytic stability, Low warpage, low specific gravity, and dimensional stability. NORYL GFN1 carries a UL746C outdoor suitability rating of F1 and is an excellent candidate for a variety of indoor and outdoor applications including construction, electrical components + displays, lawn and garden equipment. *See NORYL GFN1F resin for FDA food compliant / NSF version.

This material data has been provided by Sabic.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

General

PropertyTemperatureValueComment

Water absorption

23.0 °C

0.06 %

Show Supplier Material materials with Water absorption of 0.06 %

ASTM D 570 | (23°C/24hrs)

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

4 GPa

Show Supplier Material materials with Elastic modulus of 4 GPa

ISO 527 | 1 mm/min

Elongation

23.0 °C

4.5 %

Show Supplier Material materials with Elongation of 4.5 %

ISO 527 | yield, 50 mm/min

Flexural modulus

23.0 °C

3.5 GPa

Show Supplier Material materials with Flexural modulus of 3.5 GPa

ISO 178 | 2 mm/min

Flexural strength

23.0 °C

95 MPa

Show Supplier Material materials with Flexural strength of 95 MPa

ISO 178 | break, 2 mm/min

Impact strength, Izod unnotched

23.0 °C

25 kJ/m²

Show Supplier Material materials with Impact strength, Izod unnotched of 25 kJ/m²

ISO 180/1U | unnotched 80*10*4, -30°C

Tensile strength

23.0 °C

64 MPa

Show Supplier Material materials with Tensile strength of 64 MPa

ISO 527 | break

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

23.0 °C

5.12E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 5.12E-5 1/K

ASTM E 831 | -40°C to 40°C

Coefficient of thermal expansion, transverse

23.0 °C

7.14E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion, transverse of 7.14E-5 1/K

ASTM E 831 | -40°C to 40°C

Heat deflection temperature, 0.45 MPa

135 °C

Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 135 °C

ASTM D 648 | 3.2 mm, unannealed

Heat deflection temperature, 1.80 MPa

115 °C

Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 115 °C

ISO 75/Ae | Edgew 120*10*4 sp=100mm

Vicat softening temperature

131 °C

Show Supplier Material materials with Vicat softening temperature of 131 °C

ISO 306 | Rate B/50

Flammability

UL Recognized, 94HB Flame Class Rating: ≥1.5mm UL 94 <br> UV-light, water exposure/immersion: F1- UL 746C <br> UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=221234- -

Electrical

PropertyTemperatureValueComment

Hot-Wire Ignition

23.0 °C

3 mm

Show Supplier Material materials with Hot-Wire Ignition of 3 mm

≥, UL 746A | PLC 5

Rheological Properties

PropertyTemperatureValueComment

Melt volume-flow rate

16 cm³/10min

Show Supplier Material materials with Melt volume-flow rate of 16 cm³/10min

ISO 1133 | MVR at 300°C/5.0 kg

Shrinkage

23.0 °C

0.3 %

Show Supplier Material materials with Shrinkage of 0.3 %

SABIC method | on tensile bar

Technological properties

Property
Application areas

Document Handling, Coffee Maker/Espresso Machine, Data Transfer, Air Conditioning, Air Filtration, Building Accessory, Circuit Protection, Enclosure/Housing/Cover, Energy Management, Enclosures, Electronic Components, Fixture Bath/Shower, Furnace/Heater, Hot Water System, Heavy Vehicles, Individual Equiptment, Lab Ware and Clinical Diagnostics, Swimming Pool/Spa, Water Treatment/Filtration, Wiring Devices, Wireless Communications, Medical Device, Meter Gas, Personal Computing, Recreational Vehicle, Pump, Pipe/Fitting, Plumbing, Security/Detection, Respiratory, Sanitary, Small Appliance, Irrigation

Availability

Europe,Asia,Americas

Features

Hydrolytic Stability, Good Stiffness, Low Warpage, Structural

Processing methods

Mold Temperature: 75 to 105.0°C
Rear - Zone 1 Temperature: 260 to 305.0°C
Middle - Zone 2 Temperature: 270 to 310.0°C
Front - Zone 3 Temperature: 280 to 315.0°C
Drying Time (Cumulative): 8hrs
Melt Temperature: 295 to 315.0°C
Drying Temperature: 105 to 110.0°C
Nozzle Temperature: 295 to 315.0°C
Drying Time: 3 to 4.0hrs
Shot to Cylinder Size: 30 to 70.0%
Screw Speed: 20 to 100.0rpm
Maximum Moisture Content: 0.02%
Back Pressure: 0.3 to 0.7MPa

Supplier Disclaimer

While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.