General
Property | Temperature | Value | Comment |
---|---|---|---|
Density | 23.0 °C | 1.11 g/cm³ Show Supplier Material materials with Density of 1.11 g/cm³ | ISO 1183 |
Moisture absorption | 23.0 °C | 0.04 % Show Supplier Material materials with Moisture absorption of 0.04 % | ISO 62 | (23°C / 50% RH) |
Relative density | 23.0 °C | 1.11 [-] Show Supplier Material materials with Relative density of 1.11 [-] | ASTM D 792 |
Water absorption | 23.0 °C | 0.27 % Show Supplier Material materials with Water absorption of 0.27 % | ISO 62-1 | (23°C/saturated) |
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Elastic modulus | 23.0 °C | 2.4 GPa Show Supplier Material materials with Elastic modulus of 2.4 GPa | ISO 527 | 1 mm/min |
Elongation | 23.0 °C | 27.8 % Show Supplier Material materials with Elongation of 27.8 % | ISO 527 | break |
Flexural modulus | 23.0 °C | 2.4 GPa Show Supplier Material materials with Flexural modulus of 2.4 GPa | ISO 178 | 2 mm/min |
Flexural strength | 23.0 °C | 90 MPa Show Supplier Material materials with Flexural strength of 90 MPa | ISO 178 | yield, 2 mm/min |
Impact strength, Charpy notched | 23.0 °C | 19 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 19 kJ/m² | ISO 179/1eA | V-notch Edgew 80*10*4 sp=62mm, 23°C |
Impact strength, Izod notched | 23.0 °C | 11 kJ/m² Show Supplier Material materials with Impact strength, Izod notched of 11 kJ/m² | ISO 180/1A | 80*10*4, -30°C |
Impact strength, Izod notched, ASTM | 23.0 °C | 200 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 200 J/m | ASTM D 256 |
Instrumented Impact, Total Energy | 23.0 °C | 46 J Show Supplier Material materials with Instrumented Impact, Total Energy of 46 J | ASTM D 3763 | 23°C |
Tensile strength | 23.0 °C | 47 MPa Show Supplier Material materials with Tensile strength of 47 MPa | ISO 527 | break, 50 mm/min |
Thermal
Property | Temperature | Value | Comment | ||
---|---|---|---|---|---|
Coefficient of thermal expansion | 23.0 °C | 8.39E-5 1/K Show Supplier Material materials with Coefficient of thermal expansion of 8.39E-5 1/K | ISO 11359-2 | -40°C to 40°C | ||
Coefficient of thermal expansion, transverse | 23.0 °C | 8.54E-5 1/K Show Supplier Material materials with Coefficient of thermal expansion, transverse of 8.54E-5 1/K | ISO 11359-2 | -40°C to 40°C | ||
Heat deflection temperature | 107 °C Show Supplier Material materials with Heat deflection temperature of 107 °C | ||||
Heat deflection temperature, 1.80 MPa | 107 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 107 °C | ISO 75/Af | Flatw 80*10*4 sp=64mm | |||
Vicat softening temperature | 128 °C Show Supplier Material materials with Vicat softening temperature of 128 °C | ISO 306 | Rate B/120 | |||
Flammability | Flame Spread Index (1.52mm): 15- ASTM E 162 <br> NBS Smoke Density, Flaming, 4 min (3.2 mm): 35- ASTM E 662 <br> NBS Smoke Density, Flaming, 4 min (1.52mm): 29- ASTM E 662 <br> Vertical Burn b (12s, 1.52mm) passes at: 4sec FAR 25.853 <br> NBS Smoke Density, Flaming, 20 min (3.2 mm): 126- ASTM E 662 <br> NBS Smoke Density, Non-Flaming, 4 min (1.52mm): 7- ASTM E 662 <br> Vertical Burn a (60s, 1.52mm) passes at: 0sec FAR 25.853 <br> Draeger Tube Toxicity, Non-Flaming (1.52mm): Pass- AITM 3.0005, ABD0031 <br> Draeger Tube Toxicity, Flaming (1.52mm): Pass- AITM 3.0005, ABD0031 |
Rheological Properties
Property | Temperature | Value | Comment |
---|---|---|---|
Melt mass-flow rate | 42.7 g/10min Show Supplier Material materials with Melt mass-flow rate of 42.7 g/10min | ASTM D 1238 | 300°C/5.0 kgf | |
Melt volume-flow rate | 17 cm³/10min Show Supplier Material materials with Melt volume-flow rate of 17 cm³/10min | ISO 1133 | MVR at 280°C/5.0 kg | |
Shrinkage | 23.0 °C | 0.5 % Show Supplier Material materials with Shrinkage of 0.5 % | SABIC method | 3.2 mm |
Technological properties
Property | ||
---|---|---|
Application areas | Displays, Air Conditioning, Air Cabin Interiors, Vending Machine, Rail Cabin Interiors, Rail Seating, Rail, Interior Rail Components | |
Availability | Europe,Asia,Americas | |
Processing methods | Back Pressure: 0.3 to 0.7MPa | |
Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. |