NORYL™ Resin EN185 - Americas

Want to keep this datasheet? Save it now in your required format

Description

NORYL™ EN185 resin is a non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This extrusion grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of v0 at 3mm and V1 at 1.5mm. NORYL EN185 resin exhibits excellent impact strength, very low moisture absorption, good dimensional stability, and great machinability. NORYL EN185 resin is an excellent candidate for a variety of applications including fiber optic ducting,

This material data has been provided by Sabic.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

General

PropertyTemperatureValueComment

Relative density

23.0 °C

1.08 [-]

Show Supplier Material materials with Relative density of 1.08 [-]

ASTM D 792 |

Water absorption

23.0 °C

0.07 %

Show Supplier Material materials with Water absorption of 0.07 %

ASTM D 570 | (23°C/24hrs)

Mechanical

PropertyTemperatureValueComment

Elongation

23.0 °C

50 %

Show Supplier Material materials with Elongation of 50 %

ASTM D 638 | brk, Type I, 50 mm/min

Flexural modulus

23.0 °C

2.27 GPa

Show Supplier Material materials with Flexural modulus of 2.27 GPa

ASTM D 790 | 2.6 mm/min, 100 mm span

Flexural strength

23.0 °C

67 MPa

Show Supplier Material materials with Flexural strength of 67 MPa

ASTM D 790 | yld, 2.6 mm/min, 100 mm span

Gardner Impact

23.0 °C

24 J

Show Supplier Material materials with Gardner Impact of 24 J

ASTM D 3029 | -30°C

Hardness, Rockwell R

23.0 °C

113 [-]

Show Supplier Material materials with Hardness, Rockwell R of 113 [-]

ASTM D 785

Impact strength, Izod notched

23.0 °C

389 kJ/m²

Show Supplier Material materials with Impact strength, Izod notched of 389 kJ/m²

ASTM D 256 | notched, 23°C

Impact strength, Izod notched, ASTM

23.0 °C

160 J/m

Show Supplier Material materials with Impact strength, Izod notched, ASTM of 160 J/m

ASTM D 256 | -40°C

Tensile strength

23.0 °C

42 MPa

Show Supplier Material materials with Tensile strength of 42 MPa

ASTM D 638 | yld, Type I, 50 mm/min

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

23.0 °C

7.38E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 7.38E-5 1/K

ASTM E 831 | -40°C to 95°C

Heat deflection temperature, 0.45 MPa

93 °C

Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 93 °C

ASTM D 648 | 6.4 mm, unannealed

Heat deflection temperature, 1.80 MPa

82 °C

Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 82 °C

ASTM D 648 | 6.4 mm, unannealed

Flammability

UL Recognized, 94V-1 Flame Class Rating: ≥1.5mm UL 94 <br> UL Recognized, 94V-0 Flame Class Rating: ≥3mm UL 94 <br> Radiant Panel Listing: TRUE- UL Tested <br> UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=221153- -

Electrical

PropertyTemperatureValueComment

Comparative tracking index

23.0 °C

2 V

Show Supplier Material materials with Comparative tracking index of 2 V

UL 746A | (UL) {PLC}

Dielectric constant, 60Hz

23.0 °C

2.8 [-]

Show Supplier Material materials with Dielectric constant, 60Hz of 2.8 [-]

ASTM D 150 | 50/60 Hz

Dielectric strength

23.0 °C

24.8 kV/mm

Show Supplier Material materials with Dielectric strength of 24.8 kV/mm

ASTM D 149 | in oil, 3.2 mm

Dissipation factor, 1MHz

23.0 °C

3.5E-3 [-]

Show Supplier Material materials with Dissipation factor, 1MHz of 3.5E-3 [-]

IEC 60250

Dissipation factor, 50Hz

23.0 °C

4E-3 [-]

Show Supplier Material materials with Dissipation factor, 50Hz of 4E-3 [-]

ASTM D 150 | 50/60 Hz

High Amp Arc Ignition

23.0 °C

1.5 mm

Show Supplier Material materials with High Amp Arc Ignition of 1.5 mm

≥, UL 746A | PLC 0

High Volt Arc Track Rate

23.0 °C

4 PLC Code

Show Supplier Material materials with High Volt Arc Track Rate of 4 PLC Code

UL 746A | (PLC)

Hot-Wire Ignition

23.0 °C

1.5 mm

Show Supplier Material materials with Hot-Wire Ignition of 1.5 mm

≥, UL 746A | PLC 2

Technological properties

Property
Application areas

Electronic Components, Data Transfer, Rail Cabin Interiors, Rail Seating, Wiring Devices, Wireless Communications

Availability

Americas

Features

Hydrolytic Stability, Flame Retardant, Good Stiffness, Non-Halogenated, Non-Chlorinated, High Impact Resistance

Processing methods

Drying Time (Cumulative): 8hrs
Barrel - Zone 2 Temperature: 170°C
Drying Time: 2 to 4.0hrs
Adapter Temperature: 205°C
Barrel - Zone 1 Temperature: 170°C
Barrel - Zone 4 Temperature: 190°C
Die Temperature: 205°C
Drying Temperature: 90 to 100.0°C
Maximum Moisture Content: 0.02%
Barrel - Zone 3 Temperature: 190°C
Melt Temperature: 195 to 210.0°C

Supplier Disclaimer

While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.