NORYL GTX™ Resin NX0031 - Americas

Want to keep this datasheet? Save it now in your required format

Description

NORYL GTX™ NX0031 resin is a non-reinforced alloy of PPE/PA. This conductive, injection moldable grade exhibits high heat resistance, excellent chemical resistance, and high impact resistance. NORYL NX0031 resin was designed for electrostatic painting and powder coating without the need for a conductive primer. This material can also be solvent painted and is an excellent for candidate for exterior, painted applications such as trim and fairings for outdoor vehicles, motorcycle, heavy truck, bus, personal watercraft, and marine. It is available only in black.

This material data has been provided by Sabic.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.09 g/cm³

Show Supplier Material materials with Density of 1.09 g/cm³

ISO 1183

Moisture absorption

23.0 °C

1.2 %

Show Supplier Material materials with Moisture absorption of 1.2 %

ISO 62 | (23°C / 50% RH)

Relative density

23.0 °C

1.09 [-]

Show Supplier Material materials with Relative density of 1.09 [-]

ASTM D 792

Water absorption

23.0 °C

4.2 %

Show Supplier Material materials with Water absorption of 4.2 %

ISO 62-1 | (23°C/saturated)

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

2 GPa

Show Supplier Material materials with Elastic modulus of 2 GPa

ISO 527 | 1 mm/min

Elongation

23.0 °C

4 %

Show Supplier Material materials with Elongation of 4 %

ISO 527 | yield, 50 mm/min

Flexural modulus

23.0 °C

1.9 GPa

Show Supplier Material materials with Flexural modulus of 1.9 GPa

ISO 178 | 2 mm/min

Flexural strength

23.0 °C

75 MPa

Show Supplier Material materials with Flexural strength of 75 MPa

ISO 178 | yield, 2 mm/min

Impact strength, Charpy notched

23.0 °C

18 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 18 kJ/m²

ISO 179/1eA | V-notch Edgew, 23°C, 80*10*4 sp=62mm

Impact strength, Izod notched

23.0 °C

20 kJ/m²

Show Supplier Material materials with Impact strength, Izod notched of 20 kJ/m²

ISO 180/1A | 80*10*4, 23°C

Impact strength, Izod notched, ASTM

23.0 °C

224 J/m

Show Supplier Material materials with Impact strength, Izod notched, ASTM of 224 J/m

ASTM D 256

Instrumented Impact, Total Energy

23.0 °C

42 J

Show Supplier Material materials with Instrumented Impact, Total Energy of 42 J

ASTM D 3763 | 23°C

Tensile strength

23.0 °C

50 MPa

Show Supplier Material materials with Tensile strength of 50 MPa

ISO 527 | yield, 50 mm/min

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

23.0 °C

1E-4 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1E-4 1/K

ISO 11359-2 | 23°C to 60°C

Coefficient of thermal expansion, transverse

23.0 °C

9E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion, transverse of 9E-5 1/K

ISO 11359-2 | 23°C to 60°C

Heat deflection temperature

136 - 176 °C

Show Supplier Material materials with Heat deflection temperature of 136 - 176 °C

Heat deflection temperature, 0.45 MPa

176 °C

Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 176 °C

ASTM D 648 | 3.2 mm, unannealed

Heat deflection temperature, 1.80 MPa

136 °C

Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 136 °C

ASTM D 648 | 3.2mm, unannealed

Vicat softening temperature

180 °C

Show Supplier Material materials with Vicat softening temperature of 180 °C

ISO 306 | Rate B/120

Flammability

UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=533883- - <br> UV-light, water exposure/immersion: F1- UL 746C <br> UL Recognized, 94HB Flame Class Rating: ≥1.5mm UL 94

Rheological Properties

PropertyTemperatureValueComment

Melt mass-flow rate

8 g/10min

Show Supplier Material materials with Melt mass-flow rate of 8 g/10min

ASTM D 1238 | 280°C/5.0 kgf

Melt volume-flow rate

8 cm³/10min

Show Supplier Material materials with Melt volume-flow rate of 8 cm³/10min

ISO 1133 | MVR at 280°C/5.0 kg

Shrinkage

23.0 °C

1.3 %

Show Supplier Material materials with Shrinkage of 1.3 %

SABIC method | 3.2 mm

Technological properties

Property
Application areas

Neighborhood Electric Vehicle, Motorcycle

Availability

Americas

Processing methods

Drying Time: 3 to 4.0hrs
Drying Temperature: 95 to 105.0°C
Back Pressure: 0.3 to 1.4MPa
Front - Zone 3 Temperature: 265 to 295.0°C
Shot to Cylinder Size: 30 to 50.0%
Drying Time (Cumulative): 8hrs
Melt Temperature: 270 to 295.0°C
Mold Temperature: 65 to 95.0°C
Rear - Zone 1 Temperature: 255 to 295.0°C
Vent Depth: 0.013 to 0.038mm
Screw Speed: 20 to 100.0rpm
Middle - Zone 2 Temperature: 260 to 295.0°C
Minimum Moisture Content: 0.02%
Maximum Moisture Content: 0.07%
Nozzle Temperature: 270 to 295.0°C

Supplier Disclaimer

While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.