NORYL™ Resin PKN4752 - Asia

Want to keep this datasheet? Save it now in your required format


NORYL PKN4752 resin is a non-reinforced, translucent, high heat blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This extrudable and injection moldable grade exhibits high heat resistance, dimensional stability, and appears translucent with a yellow tint in the natural color. NORYL PKN4752 resin is an excellent candidate for high performance packaging in food, electronics, and healthcare. *See NORYL PKN4752F resin for FDA food compliant version.

This material data has been provided by Sabic.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts




Elastic modulus

23.0 °C

3 GPa

Show Supplier Material materials with Elastic modulus of 3 GPa

ASTM D 638 | 50 mm/min


23.0 °C

6 %

Show Supplier Material materials with Elongation of 6 %

ASTM D 638 | yld, Type I, 50 mm/min

Flexural modulus

23.0 °C

2.94 GPa

Show Supplier Material materials with Flexural modulus of 2.94 GPa

ASTM D 790 | 2.6 mm/min, 100 mm span

Flexural strength

23.0 °C

144 MPa

Show Supplier Material materials with Flexural strength of 144 MPa

ASTM D 790 | yld, 1.3 mm/min, 50 mm span

Impact strength, Izod notched

23.0 °C

32 kJ/m²

Show Supplier Material materials with Impact strength, Izod notched of 32 kJ/m²

ASTM D 256 | notched, 23°C

Tensile strength

23.0 °C

73 MPa

Show Supplier Material materials with Tensile strength of 73 MPa

ASTM D 638 | brk, Type I, 50 mm/min



Heat deflection temperature, 0.45 MPa

160 °C

Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 160 °C

ASTM D 648 | 3.2 mm, unannealed

Heat deflection temperature, 1.80 MPa

151 °C

Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 151 °C

ASTM D 648 | 6.4 mm, unannealed

Vicat softening temperature

173 °C

Show Supplier Material materials with Vicat softening temperature of 173 °C

ASTM D 1525 | Rate B/50

Technological properties

Application areas

Bottles, Audio, Additive Semiconductor Materials, Food Container, Electronic Components




Hydrolytic Stability, Low Creep Sensitivity, High Heat Resistance, Translucent, Low Warpage

Processing methods

Melt Temperature: 265 to 275.0°C
Drying Time (Cumulative): 8hrs
Barrel - Zone 1 Temperature: 205 to 225.0°C
Barrel - Zone 3 Temperature: 240 to 265.0°C
Adapter Temperature: 240 to 265.0°C
Die Temperature: 240 to 265.0°C
Maximum Moisture Content: 0%
Barrel - Zone 4 Temperature: 240 to 265.0°C
Roll Stack Temp - Middle: 105 to 120.0°C
Barrel - Zone 2 Temperature: 215 to 240.0°C
Drying Temperature: 70 to 80.0°C
Drying Time: 2 to 4.0hrs
Roll Stack Temp - Top: 105 to 120.0°C
Roll Stack Temp - Bottom: 105 to 120.0°C

Supplier Disclaimer

While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.