LEXAN™ Copolymer FXEMPX1L - Asia

Want to keep this datasheet? Save it now in your required format

Description

Opaque EXL, UV-Stabilized & light shielding capability, for portable electronics device enclosure application. Only available in white, grey and limited pastel colors. Consult CIC or PM for color availability & limitation.

This material data has been provided by Sabic.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.3 g/cm³

Show Supplier Material materials with Density of 1.3 g/cm³

ISO 1183

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

2.04 GPa

Show Supplier Material materials with Elastic modulus of 2.04 GPa

ASTM D 638 | 50 mm/min

Elongation

23.0 °C

5 %

Show Supplier Material materials with Elongation of 5 %

ASTM D 638 | yld, Type I, 50 mm/min

Flexural modulus

23.0 °C

1.99 GPa

Show Supplier Material materials with Flexural modulus of 1.99 GPa

ASTM D 790 | 1.3 mm/min, 50 mm span

Flexural strength

23.0 °C

80 MPa

Show Supplier Material materials with Flexural strength of 80 MPa

ASTM D 790 | yld, 1.3 mm/min, 50 mm span

Impact strength, Izod notched

23.0 °C

530 kJ/m²

Show Supplier Material materials with Impact strength, Izod notched of 530 kJ/m²

ASTM D 256 | notched, 23°C

Impact strength, Izod notched, ASTM

23.0 °C

530 J/m

Show Supplier Material materials with Impact strength, Izod notched, ASTM of 530 J/m

ASTM D 256 | notched, 23°C

Tensile strength

23.0 °C

46 MPa

Show Supplier Material materials with Tensile strength of 46 MPa

ASTM D 638 | brk, Type I, 50 mm/min

Thermal

PropertyValueComment

Heat deflection temperature, 1.80 MPa

114 °C

Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 114 °C

ASTM D 648 | 3.2mm, unannealed

Rheological Properties

PropertyValueComment

Melt volume-flow rate

15 cm³/10min

Show Supplier Material materials with Melt volume-flow rate of 15 cm³/10min

ISO 1133 | MVR at 300°C/1.2 kg

Technological properties

Property
Application areas

Displays

Availability

Asia

Features

High Impact Resistance

Processing methods

Maximum Moisture Content: 0.02%
Hopper Temperature: 60 to 80.0°C
Mold Temperature: 70 to 95.0°C
Drying Temperature: 120°C
Middle - Zone 2 Temperature: 280 to 305.0°C
Rear - Zone 1 Temperature: 260 to 280.0°C
Melt Temperature: 295 to 315.0°C
Nozzle Temperature: 290 to 310.0°C
Front - Zone 3 Temperature: 295 to 315.0°C
Drying Time: 3 to 4.0hrs

Supplier Disclaimer

While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.