LEXAN™ Copolymer CXT19UV - Asia

Want to keep this datasheet? Save it now in your required format

Description

LEXAN™ CXT19UV Resin is an UV-stabilized High Heat Polycarbonate Copolymer Resin with Vicat of 190°C and crystal clear transparency. This resin is optimized to have a broad processing window with limited yellowing. It is available in limited transparent colors.

This material data has been provided by Sabic.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.22 g/cm³

Show Supplier Material materials with Density of 1.22 g/cm³

ISO 1183

Moisture absorption

23.0 °C

0.3 %

Show Supplier Material materials with Moisture absorption of 0.3 %

ISO 62 | (23°C / 50% RH)

Relative density

23.0 °C

1.22 [-]

Show Supplier Material materials with Relative density of 1.22 [-]

ASTM D 792 |

Water absorption

23.0 °C

0.5 %

Show Supplier Material materials with Water absorption of 0.5 %

ISO 62-1 | (23°C/saturated)

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

2.5 GPa

Show Supplier Material materials with Elastic modulus of 2.5 GPa

ISO 527 | 1 mm/min

Elongation

23.0 °C

7 %

Show Supplier Material materials with Elongation of 7 %

ISO 527 | yield, 50 mm/min

Flexural modulus

23.0 °C

2.6 GPa

Show Supplier Material materials with Flexural modulus of 2.6 GPa

ISO 178 | 2 mm/min

Flexural strength

23.0 °C

120 MPa

Show Supplier Material materials with Flexural strength of 120 MPa

ISO 178 | yield, 2 mm/min

Impact strength, Charpy notched

23.0 °C

7 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 7 kJ/m²

ISO 179/1eA | V-notch Edgew 80*10*3 sp=62mm, -30°C

Impact strength, Izod notched

23.0 °C

6 kJ/m²

Show Supplier Material materials with Impact strength, Izod notched of 6 kJ/m²

ISO 180/1A | notched 80*10*3, -30°C

Impact strength, Izod notched, ASTM

23.0 °C

80 J/m

Show Supplier Material materials with Impact strength, Izod notched, ASTM of 80 J/m

ASTM D 256 | notched, 23°C

Tensile strength

23.0 °C

65 MPa

Show Supplier Material materials with Tensile strength of 65 MPa

ISO 527 | break, 50 mm/min

Impact strength, Charpy unnotched

ISO 179/1eU | Unnotch Edgew 80*10*3 sp=62mm, 23°C

Impact strength, Izod unnotched

ISO 180/1U | unnotched 80*10*3, 23°C,

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

23.0 °C

6E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 6E-5 1/K

ISO 11359-2 | -40°C to 40°C

Coefficient of thermal expansion, transverse

23.0 °C

6E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion, transverse of 6E-5 1/K

ISO 11359-2 | -40°C to 40°C

Glass transition temperature

195 °C

Show Supplier Material materials with Glass transition temperature of 195 °C

SABIC method | (half width)

Heat deflection temperature

170 - 185 °C

Show Supplier Material materials with Heat deflection temperature of 170 - 185 °C

Heat deflection temperature, 0.45 MPa

185 °C

Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 185 °C

ISO 75/Bf | Flatw 80*10*4 sp=64mm

Heat deflection temperature, 1.80 MPa

170 °C

Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 170 °C

ISO 75/Af | Flatw 80*10*4 sp=64mm

Thermal conductivity

23.0 °C

0.2 W/(m·K)

Show Supplier Material materials with Thermal conductivity of 0.2 W/(m·K)

ISO 8302

Vicat softening temperature

190 °C

Show Supplier Material materials with Vicat softening temperature of 190 °C

ISO 306 | Rate B/120

Optical

PropertyValueComment

Refractive index

1.61 [-]

Show Supplier Material materials with Refractive index of 1.61 [-]

ISO 489

Transmission

87 %

Show Supplier Material materials with Transmission of 87 %

ASTM D1003 | at 3.0 mm

Rheological Properties

PropertyTemperatureValueComment

Melt mass-flow rate

17 g/10min

Show Supplier Material materials with Melt mass-flow rate of 17 g/10min

ASTM D 1238 | 330°C/2.16 kgf

Melt volume-flow rate

30 cm³/10min

Show Supplier Material materials with Melt volume-flow rate of 30 cm³/10min

ISO 1133 | MVR at 350°C/2.16kg

Shrinkage

23.0 °C

0.7 %

Show Supplier Material materials with Shrinkage of 0.7 %

SABIC method | 3.2 mm

Shrinkage, transverse

23.0 °C

0.7 %

Show Supplier Material materials with Shrinkage, transverse of 0.7 %

SABIC method | 3.2 mm

Technological properties

Property
Application areas

Personal safety, High heat films, Sensor lens, Flash lens, Camera lens, Forward Lighting, Electronic Components, Displays

Availability

Europe,Asia,Americas

Processing methods

Drying Temperature: 135°C
Drying Time: 5 to 6.0hrs
Maximum Moisture Content: 0.02%
Melt Temperature: 310 to 350.0°C
Nozzle Temperature: 305 to 345.0°C
Front - Zone 3 Temperature: 310 to 350.0°C
Middle - Zone 2 Temperature: 300 to 340.0°C
Rear - Zone 1 Temperature: 280 to 330.0°C
Mold Temperature: 120 to 170.0°C
Back Pressure: 0.3 to 0.7MPa
Screw Speed: 40 to 70.0rpm
Shot to Cylinder Size: 40 to 60.0%
Vent Depth: 0.025 to 0.075mm

Supplier Disclaimer

While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.