General
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Elastic modulus | 23.0 °C | 2.2 GPa Show Supplier Material materials with Elastic modulus of 2.2 GPa | ASTM D 638 | 50 mm/min |
Elongation | 23.0 °C | 7.5 % Show Supplier Material materials with Elongation of 7.5 % | ASTM D 638 | yld, Type I, 50 mm/min |
Flexural modulus | 23.0 °C | 2.2 GPa Show Supplier Material materials with Flexural modulus of 2.2 GPa | ASTM D 790 | 1.3 mm/min, 50 mm span |
Flexural strength | 23.0 °C | 105 MPa Show Supplier Material materials with Flexural strength of 105 MPa | ASTM D 790 | brk, 1.3 mm/min, 50 mm span |
Impact strength, Izod notched | 23.0 °C | 578 kJ/m² Show Supplier Material materials with Impact strength, Izod notched of 578 kJ/m² | ASTM D 256 | notched, 23°C |
Impact strength, Izod notched, ASTM | 23.0 °C | 578 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 578 J/m | ASTM D 256 | notched, 23°C |
Impact strength, Izod unnotched, ASTM | 23.0 °C | 2140 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 2140 J/m | ASTM D 4812 | 23°C |
Instrumented Impact, Total Energy | 23.0 °C | 77 J Show Supplier Material materials with Instrumented Impact, Total Energy of 77 J | ASTM D 3763 | 23°C |
Instrumented Impact, at Peak | 23.0 °C | 73 J Show Supplier Material materials with Instrumented Impact, at Peak of 73 J | ASTM D 3763 | 23°C |
Tensile strength | 23.0 °C | 70 MPa Show Supplier Material materials with Tensile strength of 70 MPa | ASTM D 638 | brk, Type I, 50 mm/min |
Thermal
Property | Value | Comment |
---|---|---|
Ball Pressure Test | PASS | IEC 60695-10-2 | 125°C +/- 2°C |
Heat deflection temperature | 147 - 160 °C Show Supplier Material materials with Heat deflection temperature of 147 - 160 °C | |
Heat deflection temperature, 0.45 MPa | 160 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 160 °C | ASTM D 648 | 3.2 mm, unannealed |
Heat deflection temperature, 1.80 MPa | 147 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 147 °C | ASTM D 648 | 3.2mm, unannealed |
Vicat softening temperature | 164 °C Show Supplier Material materials with Vicat softening temperature of 164 °C | ASTM D 1525 | Rate B/50 |
Rheological Properties
Property | Value | Comment |
---|---|---|
Melt mass-flow rate | 15 g/10min Show Supplier Material materials with Melt mass-flow rate of 15 g/10min | ASTM D 1238 | 330°C/2.16 kgf |
Technological properties
Property | ||
---|---|---|
Application areas | Enclosures | |
Availability | Europe,Americas | |
Processing methods | Front - Zone 3 Temperature: 350 to 370.0°C | |
Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. |