LNP™ THERMOCOMP™ Compound RF006LXP - Asia

Want to keep this datasheet? Save it now in your required format

Description

LNP THERMOCOMP RF006LXP is a compound based on Nylon 66 resin containing 30% Glass Fiber. Added features of this material include: Low Extractible.

This material data has been provided by Sabic.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.59 g/cm³

Show Supplier Material materials with Density of 1.59 g/cm³

ASTM D 792

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

10.3 GPa

Show Supplier Material materials with Elastic modulus of 10.3 GPa

ASTM D 638 | 50 mm/min

Elongation

23.0 °C

2.5 %

Show Supplier Material materials with Elongation of 2.5 %

ASTM D 638 | break

Flexural modulus

23.0 °C

8.8 GPa

Show Supplier Material materials with Flexural modulus of 8.8 GPa

ASTM D 790

Flexural strength

23.0 °C

224 MPa

Show Supplier Material materials with Flexural strength of 224 MPa

ASTM D 790

Impact strength, Izod notched

23.0 °C

80 kJ/m²

Show Supplier Material materials with Impact strength, Izod notched of 80 kJ/m²

ASTM D 256 | notched, 23°C

Impact strength, Izod notched, ASTM

23.0 °C

80 J/m

Show Supplier Material materials with Impact strength, Izod notched, ASTM of 80 J/m

ASTM D 256 | notched, 23°C

Impact strength, Izod unnotched, ASTM

23.0 °C

208 J/m

Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 208 J/m

ASTM D 4812 | 23°C

Tensile strength

23.0 °C

155 MPa

Show Supplier Material materials with Tensile strength of 155 MPa

ASTM D 638 | break

Thermal

PropertyValueComment

Heat deflection temperature

118 °C

Show Supplier Material materials with Heat deflection temperature of 118 °C

Heat deflection temperature, 1.80 MPa

118 °C

Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 118 °C

ASTM D 648 | 3.2mm, unannealed

Technological properties

Property
Application areas

Surgical Devices

Availability

Europe,Asia,Americas

Supplier Disclaimer

While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.