LNP™ LUBRICOMP™ Compound PFL38S - Europe

Want to keep this datasheet? Save it now in your required format

Description

LNP LUBRICOMP PFL38S is a compound based on Nylon 6 resin containing 40% Glass Fiber, 15% PTFE. Added features of this material include: Heat Stabilized, Wear Resistant

This material data has been provided by Sabic.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

Mechanical

PropertyTemperatureValueComment

Elongation

23.0 °C

3.5 %

Show Supplier Material materials with Elongation of 3.5 %

ISO 527 | break, 5 mm/min

Flexural modulus

23.0 °C

11.6 GPa

Show Supplier Material materials with Flexural modulus of 11.6 GPa

ISO 178 | 2 mm/min

Flexural strength

23.0 °C

251 MPa

Show Supplier Material materials with Flexural strength of 251 MPa

ISO 178 | yield, 2 mm/min

Impact strength, Izod notched

23.0 °C

14 kJ/m²

Show Supplier Material materials with Impact strength, Izod notched of 14 kJ/m²

ISO 180/1A | 80*10*4, 23°C

Tensile strength

23.0 °C

172 MPa

Show Supplier Material materials with Tensile strength of 172 MPa

ISO 527 | break, 5 mm/min

Thermal

PropertyValueComment

Heat deflection temperature, 1.80 MPa

203 °C

Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 203 °C

ISO 75/Af | Flatw 80*10*4 sp=64mm

Rheological Properties

PropertyTemperatureValueComment

Shrinkage

23.0 °C

0.1 %

Show Supplier Material materials with Shrinkage of 0.1 %

SABIC method

Technological properties

Property
Availability

Europe,Americas

Features

Wear resistant, Heat Stabilized, Structural, Wear and Friction

Processing methods

Melt Temperature: 265 to 275.0°C
Front - Zone 3 Temperature: 275 to 290.0°C
Rear - Zone 1 Temperature: 250 to 260.0°C
Back Pressure: 0.3 to 0.7MPa
Screw Speed: 30 to 60.0rpm
Mold Temperature: 80 to 95.0°C
Maximum Moisture Content: 0.15 to 0.25%
Middle - Zone 2 Temperature: 265 to 275.0°C
Drying Time: 4hrs
Drying Temperature: 80°C

Supplier Disclaimer

While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.