EXTEM™ Resin VH1003F - Asia

Want to keep this datasheet? Save it now in your required format

Description

Transparent, Thermoplastic Polyimide (TPI) resin with a glass transition temperature (Tg) of 247C. This product has thinwall FR capability and has a UL94 V0 listing. This material is RoHS compliant and also halogen free according VDE/DIN 472 part 815. Global Food Contact Approvals. Resin is a Dual-use item and is subject to export control restrictions under both U.S. 15 CFR 774 and Annex I of Reg. (EC) 428/2009 as ECCN 1C008. Diversion contrary to law is prohibited.

This material data has been provided by Sabic.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.3 g/cm³

Show Supplier Material materials with Density of 1.3 g/cm³

ISO 1183

Limiting oxygen index

23.0 °C

45 %

Show Supplier Material materials with Limiting oxygen index of 45 %

Moisture absorption

23.0 °C

0.6 %

Show Supplier Material materials with Moisture absorption of 0.6 %

ISO 62 | (23°C / 50% RH)

Relative density

23.0 °C

1.3 [-]

Show Supplier Material materials with Relative density of 1.3 [-]

ASTM D 792 |

Water absorption

23.0 °C

1.75 %

Show Supplier Material materials with Water absorption of 1.75 %

ISO 62-1 | (23°C/saturated)

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

3.1 GPa

Show Supplier Material materials with Elastic modulus of 3.1 GPa

ISO 527 | 1 mm/min

Elongation

23.0 °C

8.5 %

Show Supplier Material materials with Elongation of 8.5 %

ISO 527 | yield, 5 mm/min

Flexural modulus

23.0 °C

3.1 GPa

Show Supplier Material materials with Flexural modulus of 3.1 GPa

ISO 178 | 2 mm/min

Flexural strength

23.0 °C

123 MPa

Show Supplier Material materials with Flexural strength of 123 MPa

ISO 178 | yield, 2 mm/min

Hardness, Ball Indentation

23.0 °C

140 MPa

Show Supplier Material materials with Hardness, Ball Indentation of 140 MPa

ISO 2039-1 | H358/30

Impact strength, Izod notched

23.0 °C

4 kJ/m²

Show Supplier Material materials with Impact strength, Izod notched of 4 kJ/m²

ISO 180/1A | notched 80*10*4, 23°C

Impact strength, Izod notched, ASTM

23.0 °C

69 J/m

Show Supplier Material materials with Impact strength, Izod notched, ASTM of 69 J/m

ASTM D 256

Instrumented Impact, Total Energy

23.0 °C

33 J

Show Supplier Material materials with Instrumented Impact, Total Energy of 33 J

ASTM D 3763 | 23°C

Tensile strength

23.0 °C

78 MPa

Show Supplier Material materials with Tensile strength of 78 MPa

ISO 527 | break, 5 mm/min

Impact strength, Charpy unnotched

ISO 179/1eU | Unnotch Edgew 80*10*4 sp=62mm, -30°C

Impact strength, Izod unnotched

ISO 180/1U | unnotched 80*10*4, -30°C

Impact strength, Izod unnotched, ASTM

ASTM D 4812 | 23°C

Thermal

PropertyTemperatureValueComment

Ball Pressure Test

Passes

IEC 60695-10-2 | 125°C +/- 2°C

Coefficient of thermal expansion

23.0 °C

5E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 5E-5 1/K

ISO 11359-2 | 23°C to 150°C

Coefficient of thermal expansion, transverse

23.0 °C

5E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion, transverse of 5E-5 1/K

ISO 11359-2 | 23°C to 150°C

Glow Wire Ignition Temperature

850 °C

Show Supplier Material materials with Glow Wire Ignition Temperature of 850 °C

IEC 60695-2-13 | 3.0 mm

Heat deflection temperature

228 - 237 °C

Show Supplier Material materials with Heat deflection temperature of 228 - 237 °C

Heat deflection temperature, 0.45 MPa

237 °C

Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 237 °C

ASTM D 648 | 6.4 mm, unannealed

Heat deflection temperature, 1.80 MPa

228 °C

Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 228 °C

ISO 75/Af | Flatw 80*10*4 sp=64mm

Thermal conductivity

23.0 °C

0.22 W/(m·K)

Show Supplier Material materials with Thermal conductivity of 0.22 W/(m·K)

ASTM E 1530 |

Vicat softening temperature

238 °C

Show Supplier Material materials with Vicat softening temperature of 238 °C

ISO 306 | Rate B/120

Flammability

Glow Wire Flammability Index 960°C, passes at: 3.2mm IEC 60695-2-12 <br> Glow Wire Flammability Index 960°C, passes at: 3.2mm IEC 60695-2-12

Electrical

PropertyTemperatureValueComment

Comparative tracking index

23.0 °C

175 V

Show Supplier Material materials with Comparative tracking index of 175 V

IEC 60112 |

Dielectric constant, 100Hz

23.0 °C

3.41 [-]

Show Supplier Material materials with Dielectric constant, 100Hz of 3.41 [-]

ASTM D 150

Dielectric strength

23.0 °C

17 kV/mm

Show Supplier Material materials with Dielectric strength of 17 kV/mm

ASTM D 149 | in oil, 3.2 mm

Dissipation factor, 100Hz

23.0 °C

8E-3 [-]

Show Supplier Material materials with Dissipation factor, 100Hz of 8E-3 [-]

IEC 60250

Dissipation factor, 1MHz

23.0 °C

7E-3 [-]

Show Supplier Material materials with Dissipation factor, 1MHz of 7E-3 [-]

IEC 60250

Dissipation factor, 1kHz

23.0 °C

1E-3 [-]

Show Supplier Material materials with Dissipation factor, 1kHz of 1E-3 [-]

IEC 60250

Dissipation factor, 50Hz

23.0 °C

0.03 [-]

Show Supplier Material materials with Dissipation factor, 50Hz of 0.03 [-]

IEC 60250 | 50/60 Hz

Optical

PropertyValueComment

Haze

2 %

Show Supplier Material materials with Haze of 2 %

ASTM D 1003 | 2.54 mm

Transmission

58 %

Show Supplier Material materials with Transmission of 58 %

ASTM D 1003 | 2.54 mm

Rheological Properties

PropertyTemperatureValueComment

Melt mass-flow rate

15.5 g/10min

Show Supplier Material materials with Melt mass-flow rate of 15.5 g/10min

ASTM D 1238 | 367°C/6.6 kgf

Melt volume-flow rate

8 cm³/10min

Show Supplier Material materials with Melt volume-flow rate of 8 cm³/10min

ISO 1133 | MVR at 360°C/5.0 kg

Shrinkage

23.0 °C

0.5 %

Show Supplier Material materials with Shrinkage of 0.5 %

SABIC method | 3.2 mm

Shrinkage, transverse

23.0 °C

0.5 %

Show Supplier Material materials with Shrinkage, transverse of 0.5 %

SABIC method | 3.2 mm

Technological properties

Property
Availability

Europe,Asia,Americas

Processing methods

Front - Zone 3 Temperature: 380 to 405.0°C
Drying Time (Cumulative): 24hrs
Vent Depth: 0.025 to 0.076mm
Melt Temperature: 380 to 405.0°C
Maximum Moisture Content: 0.02%
Shot to Cylinder Size: 40 to 60.0%
Mold Temperature: 135 to 165.0°C
Middle - Zone 2 Temperature: 370 to 395.0°C
Drying Time: 4 to 6.0hrs
Screw Speed: 40 to 70.0rpm
Rear - Zone 1 Temperature: 360 to 380.0°C
Back Pressure: 0.3 to 0.7MPa
Drying Temperature: 150°C
Nozzle Temperature: 375 to 400.0°C

Supplier Disclaimer

While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.