Stainless Steel 430F

Want to keep this datasheet? Save it now in your required format

Description

Martensitic stainless steel with very good machining properties due to its sulphur content. However, due to the addition of sulphur, it is unsuitable for welding.

Equivalent Materials

This material data has been provided by Salomons Metalen.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

7.8 g/cm³

Show Supplier Material materials with Density of 7.8 g/cm³

typical for steels

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

200 - 210 GPa

Show Supplier Material materials with Elastic modulus of 200 - 210 GPa

typical for steels

Elongation A5

23.0 °C

10 - 12 %

Show Supplier Material materials with Elongation A5 of 10 - 12 %

Hardness, Brinell

23.0 °C

220 [-]

Show Supplier Material materials with Hardness, Brinell of 220 [-]

Tensile strength

23.0 °C

650 - 850 MPa

Show Supplier Material materials with Tensile strength of 650 - 850 MPa

Yield strength Rp0.2

23.0 °C

500 MPa

Show Supplier Material materials with Yield strength Rp0.2 of 500 MPa

Chemical properties

PropertyValueComment

Carbon

0.17 %

Show Supplier Material materials with Carbon of 0.17 %

Chromium

15.5 - 17.5 %

Show Supplier Material materials with Chromium of 15.5 - 17.5 %

Manganese

1.5 %

Show Supplier Material materials with Manganese of 1.5 %

max.

Molybdenum

0.2 - 0.6 %

Show Supplier Material materials with Molybdenum of 0.2 - 0.6 %

Silicon

1 %

Show Supplier Material materials with Silicon of 1 %

max.

Sulfur

0.15 - 0.35 %

Show Supplier Material materials with Sulfur of 0.15 - 0.35 %