Properties
General
| Property | Value | Comment |
|---|---|---|
Recycled Content | 82.1 % Show Supplier Material materials with Recycled Content of 82.1 % | Average recycled content |
Mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elongation | 23.0 °C | 35 % Show Supplier Material materials with Elongation of 35 % | min. |
Tensile strength | 23.0 °C | 515 MPa Show Supplier Material materials with Tensile strength of 515 MPa | min. |
Yield strength Rp0.2 | 23.0 °C | 205 MPa Show Supplier Material materials with Yield strength Rp0.2 of 205 MPa | min. |
Chemical properties
| Property | Value | Comment | |
|---|---|---|---|
Carbon | 0.07 % Show Supplier Material materials with Carbon of 0.07 % | ||
Chromium | 22.5 % Show Supplier Material materials with Chromium of 22.5 % | ||
Iron | Balance | ||
Manganese | 1.7 % Show Supplier Material materials with Manganese of 1.7 % | ||
Nickel | 14 % Show Supplier Material materials with Nickel of 14 % | ||
Phosphorus | 0.04 % Show Supplier Material materials with Phosphorus of 0.04 % | max. | |
Silicon | 0.5 % Show Supplier Material materials with Silicon of 0.5 % | ||
Sulfur | 0.015 % Show Supplier Material materials with Sulfur of 0.015 % | max. | |
Technological properties
| Property | ||
|---|---|---|
| Welding | The weldability of Sandvik 8RE18 is good. Welding must be carried out without preheating and subsequent heat treatment is normally not required. Suitable methods of fusion welding are manual metal-arc welding (MMA/SMAW) and gas-shielded arc welding, with the TIG/GTAW method as first choice. For Sandvik 8RE18, heat input of <2.0 kJ/mm and interpass temperature of <150°C (300°F) are recommended. Recommended filler metals:
| |