General
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Elongation | 23.0 °C | 1.5 % Show Supplier Material materials with Elongation of 1.5 % | ISO 527 |
Flexural modulus | 23.0 °C | 25.5 GPa Show Supplier Material materials with Flexural modulus of 25.5 GPa | ISO 178 |
Flexural strength | 23.0 °C | 380 MPa Show Supplier Material materials with Flexural strength of 380 MPa | ISO 178 |
Impact strength, Charpy notched | 23.0 °C | 12 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 12 kJ/m² | ISO 179 |
Tensile strength | 23.0 °C | 250 MPa Show Supplier Material materials with Tensile strength of 250 MPa | ISO 527 |
Thermal
Property | Temperature | Value | Comment | ||
---|---|---|---|---|---|
Heat deflection temperature, 1.80 MPa | 335 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 335 °C | ISO 75 | |||
Melting point | 343 °C Show Supplier Material materials with Melting point of 343 °C | ISO 11357 (10°C/min) | |||
Thermal conductivity | 23.0 °C | 1 W/(m·K) Show Supplier Material materials with Thermal conductivity of 1 W/(m·K) | ISO 22007-4 | ||
Flammability | V-0, UL-94 |
Electrical
Property | Temperature | Value | Comment |
---|---|---|---|
Volume resistivity | 23.0 °C | 100000 Ω·cm Show Supplier Material materials with Volume resistivity of 100000 Ω·cm | IEC 60093 |
Technological properties
Property | ||
---|---|---|
Application areas | Chemical pump pump body and impeller, cable plug, junction box, ultra pure water system pipe fittings and valves.Engine bearing, shim, sealing element, clutch ring.The driving and brake parts of a car. Cable, wire, coil skeleton, connector, etc | |
Fillers | 30% Carbon Fiber | |
Processing methods | Extrusion or Injection Moulding / Test Specimen Production: Drying 150°C & 3 hours/120°C & 5 hours - Injection molding melt temperature: 375-395°C - Injection molding mold temperature: 180-210°C |