Properties
General
| Property | Value | Comment |
|---|---|---|
Density | 1.1 g/cm³ Show Supplier Material materials with Density of 1.1 g/cm³ | ASTM D792 |
Dimension
Mechanical
| Property | Value | Comment |
|---|---|---|
Elongation | 30 % Show Supplier Material materials with Elongation of 30 % | ASTM D638 |
Flexural modulus | 2.15 GPa Show Supplier Material materials with Flexural modulus of 2.15 GPa | ASTM D790 |
Flexural strength | 60.81 MPa Show Supplier Material materials with Flexural strength of 60.81 MPa | ASTM D790 |
Yield strength | 37.75 MPa Show Supplier Material materials with Yield strength of 37.75 MPa | ASTM D638 |
Thermal
| Property | Value | Pressure | Comment |
|---|---|---|---|
Heat deflection temperature | 90 °C Show Supplier Material materials with Heat deflection temperature of 90 °C | 1.8 MPa | ASTM D648, unannealed-annealed condition |
100 °C Show Supplier Material materials with Heat deflection temperature of 100 °C | 1.8 MPa | ASTM D648, unannealed-annealed condition | |
Vicat softening temperature | 107.0 °C Show Supplier Material materials with Vicat softening temperature of 107.0 °C | ASTM D1525 |
Technological properties
| Property | ||
|---|---|---|
| Application areas | END-USE PARTS: containers, holders - PROTOTYPES: mechanical parts, architectural models - ELECTRONICS: covers, cases - DECORATIONS: lamps, vases | |
| Processing methods | Bed heating required, printing temperature: 250-270°C, bed temperature: 90-110°C | |