General
Property | Value | Comment |
---|---|---|
Density | 1.07 g/cm³ Show Supplier Material materials with Density of 1.07 g/cm³ | |
Water absorption | 0.8 % Show Supplier Material materials with Water absorption of 0.8 % | ASTM D570 |
Dimension
Property | Value | Comment |
---|---|---|
Diameter | 1.75 mm Show Supplier Material materials with Diameter of 1.75 mm | Tolerance +/- 0.05 mm |
Mechanical
Property | Value | Comment |
---|---|---|
Elongation | 900 % Show Supplier Material materials with Elongation of 900 % | ASTM D638 |
Flexural modulus | 0.066 GPa Show Supplier Material materials with Flexural modulus of 0.066 GPa | ASTM D790 |
Hardness, Shore D | 30.0 [-] Show Supplier Material materials with Hardness, Shore D of 30.0 [-] | ASTM D2240 |
Rebound Resilience | 72.0 % Show Supplier Material materials with Rebound Resilience of 72.0 % | ASTM D2632 |
Tear strength | 95.0 kN/m Show Supplier Material materials with Tear strength of 95.0 kN/m | ASTM D1004 |
Tensile strength | 21.57 MPa Show Supplier Material materials with Tensile strength of 21.57 MPa | ASTM D638 |
Thermal
Property | Value | Comment |
---|---|---|
Melting point | 174.0 °C Show Supplier Material materials with Melting point of 174.0 °C | ASTM D3418 |
Technological properties
Property | ||
---|---|---|
Application areas | RUBBER ELEMENTS OF MACHINES: Polymer Gaskets, elements that are frequently bent - GADGETS OR THEIR ELEMENTS: phone sleeves and cases, watch-, pulse counter-, pedometer straps - LINKING ELEMENTS: flexible hinges - TOYS OR THEIR ELEMENTS: tires, rubber figures - JEWELLERY: bands, bracelets | |
Processing methods | Print temperature: 200 – 220°C, bed temperature: 50 – 70 °C - to remove the print easier, it is recommended to heat the bed to 110°C |