Properties
General
| Property | Value | Comment |
|---|---|---|
Density | 1.24 g/cm³ Show Supplier Material materials with Density of 1.24 g/cm³ | ASTM D792 |
Dimension
Mechanical
| Property | Value | Comment |
|---|---|---|
Elastic modulus | 3.6 GPa Show Supplier Material materials with Elastic modulus of 3.6 GPa | ASTM D882 |
Elongation | 6 % Show Supplier Material materials with Elongation of 6 % | ASTM D882 |
Flexural modulus | 3.8 GPa Show Supplier Material materials with Flexural modulus of 3.8 GPa | ASTM D790 |
Flexural strength | 83 MPa Show Supplier Material materials with Flexural strength of 83 MPa | ASTM D790 |
Tensile strength | 53 MPa Show Supplier Material materials with Tensile strength of 53 MPa | ASTM D882 |
Thermal
| Property | Value | Pressure | Comment |
|---|---|---|---|
Heat deflection temperature | 55 °C Show Supplier Material materials with Heat deflection temperature of 55 °C | 0.45 MPa | ASTM E2092 |
Rheological Properties
| Property | Value | Comment |
|---|---|---|
Melt mass-flow rate | 6 g/10min Show Supplier Material materials with Melt mass-flow rate of 6 g/10min | ASTM D1238, 210°C/2.16Kg |
Technological properties
| Property | ||
|---|---|---|
| Application areas | TOYS OR THEIR ELEMENTS: human figures, animals, constructions, houses, vehicles, dice - GADGETS OR THEIR ELEMENTS: key rings, stands, phone cases - PROTOTYPES: new products, concept models - ELEMENTS OF JEWELLERY: earrings, bracelets, beads, necklaces - DECORATIONS: Christmas tree ornaments, pendants | |
| Processing methods | Print temperature: 200-230°C, Bed temperature: 50-70°C (when using plates or other means to increase the adhesion, the heating of the bed is not required), Easy PLA Aurora – recommended minimum 0,5 mm nozzle | |