Properties
General
| Property | Value |
|---|---|
Density | 7.8 g/cm³ Show Supplier Material materials with Density of 7.8 g/cm³ |
Mechanical
| Property | Value | Comment |
|---|---|---|
Elastic modulus | 220 GPa Show Supplier Material materials with Elastic modulus of 220 GPa | |
Elongation | 20 % Show Supplier Material materials with Elongation of 20 % | min. |
Tensile strength | 500.0 - 750.0 MPa Show Supplier Material materials with Tensile strength of 500.0 - 750.0 MPa |
Thermal
| Property | Value | Comment |
|---|---|---|
Coefficient of thermal expansion | 0.0000111 1/K Show Supplier Material materials with Coefficient of thermal expansion of 0.0000111 1/K | 20 to 100°C |
Thermal conductivity | 15 W/(m·K) Show Supplier Material materials with Thermal conductivity of 15 W/(m·K) |
Electrical
| Property | Value |
|---|---|
Electrical resistivity | 6.100000000000001e-07 Ω·m Show Supplier Material materials with Electrical resistivity of 6.100000000000001e-07 Ω·m |
Magnetic
| Property | Value | Comment |
|---|---|---|
Coercive force | 300.0 - 400.0 A/m Show Supplier Material materials with Coercive force of 300.0 - 400.0 A/m | Turned bar with magnetic annealing |
Relative magnetic permeability | 900 [-] Show Supplier Material materials with Relative magnetic permeability of 900 [-] | Turned bar with magnetic annealing |
1100 [-] Show Supplier Material materials with Relative magnetic permeability of 1100 [-] | Turned bar with magnetic annealing | |
Remanence | 0.8 - 1.0 T Show Supplier Material materials with Remanence of 0.8 - 1.0 T | Turned bar with magnetic annealing |
Saturation polarization | 1.57 T Show Supplier Material materials with Saturation polarization of 1.57 T | Turned bar with magnetic annealing |
Chemical properties
| Property | Value | Comment |
|---|---|---|
Carbon | 0.08 Show Supplier Material materials with Carbon of 0.08 | max. |
Chromium | 17.5 - 18.5 % Show Supplier Material materials with Chromium of 17.5 - 18.5 % | |
Manganese | 1.0 Show Supplier Material materials with Manganese of 1.0 | max. |
Molybdenum | 1.5 - 2.5 % Show Supplier Material materials with Molybdenum of 1.5 - 2.5 % | |
Nitrogen | 0.07 Show Supplier Material materials with Nitrogen of 0.07 | max. |
Phosphorus | 0.04 Show Supplier Material materials with Phosphorus of 0.04 | max. |
Silicon | 1.0 Show Supplier Material materials with Silicon of 1.0 | max. |
Sulfur | 0.15 - 0.25 % Show Supplier Material materials with Sulfur of 0.15 - 0.25 % | max. |
Technological properties
| Property | ||
|---|---|---|
| Application areas | ||
| Corrosion properties | Generalized corrosion in 2M sulphuric acid and at ambient temperature. Good resistance to generalized corrosion in sulphuric acid, better than that of UGI®4105. | |
| General machinability | Turning: UGI® 4114 has very good turning machinability (better than that of UGI® 4305). | |
| Heat Treatment | Softening: Maximum softening heat treatment with holding temperature of 800°C followed by air cooling. Do not exceed 825°C. | |
| Hot forming | Forging: Heated slowly to 850°C, then more quickly to 1100/1130°C. Forging between 1130°C and 750°C. | |
| Other | Available products: Contact the supplier for dimensions | |
| Surface Treatment | contact the supplier | |