Allgemein
Property | Temperature | Value |
---|---|---|
Dichte | 23.0 °C | 7.45 g/cm³ Show Supplier Material materials with Dichte of 7.45 g/cm³ |
Recycled Content | 80 % Show Supplier Material materials with Recycled Content of 80 % |
Mechanisch
Property | Temperature | Value | Comment |
---|---|---|---|
Dauerfestigkeit | 23.0 °C | 241 - 248 MPa Show Supplier Material materials with Dauerfestigkeit of 241 - 248 MPa | 100.000.000 cycles |
Dehnung A5 | 23.0 °C | 12 - 14 % Show Supplier Material materials with Dehnung A5 of 12 - 14 % | |
Druckfestigkeit | 23.0 °C | 980 - 1013 MPa Show Supplier Material materials with Druckfestigkeit of 980 - 1013 MPa | |
Druckfestigkeit, 0,1% | 23.0 °C | 262 MPa Show Supplier Material materials with Druckfestigkeit, 0,1% of 262 MPa | |
Elastizitätsmodul | 23.0 °C | 117 GPa Show Supplier Material materials with Elastizitätsmodul of 117 GPa | |
Flächenreduzierung | 23.0 °C | 12 - 14 % Show Supplier Material materials with Flächenreduzierung of 12 - 14 % | |
Härte, HBW | 23.0 °C | 187 - 202 [-] Show Supplier Material materials with Härte, HBW of 187 - 202 [-] | HBW 10/3000 |
Härte, Rockwell B | 23.0 °C | 91 - 94 [-] Show Supplier Material materials with Härte, Rockwell B of 91 - 94 [-] | |
Izod Aufprallenergie | 23.0 °C | 19 - 22 J Show Supplier Material materials with Izod Aufprallenergie of 19 - 22 J | |
Kerbschlagenergie | 23.0 °C | 12 - 14 J Show Supplier Material materials with Kerbschlagenergie of 12 - 14 J | |
Proportionalitätsgrenze bei der Kompression | 23.0 °C | 221 - 248 MPa Show Supplier Material materials with Proportionalitätsgrenze bei der Kompression of 221 - 248 MPa | |
Scherfestigkeit | 23.0 °C | 428 - 448 MPa Show Supplier Material materials with Scherfestigkeit of 428 - 448 MPa | |
Streckgrenze Rp0,5 | 23.0 °C | 338 - 379 MPa Show Supplier Material materials with Streckgrenze Rp0,5 of 338 - 379 MPa | |
Zugfestigkeit | 23.0 °C | 655 - 745 MPa Show Supplier Material materials with Zugfestigkeit of 655 - 745 MPa |
Thermisch
Property | Temperature | Value |
---|---|---|
Koeffizient der thermischen Ausdehnung | 23.0 °C | 1.62E-5 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.62E-5 1/K |
Spezifische Wärmekapazität | 23.0 °C | 420 J/(kg·K) Show Supplier Material materials with Spezifische Wärmekapazität of 420 J/(kg·K) |
Wärmeleitfähigkeit | 23.0 °C | 63 W/(m·K) Show Supplier Material materials with Wärmeleitfähigkeit of 63 W/(m·K) |
Elektrisch
Property | Temperature | Value |
---|---|---|
Elektrische Leitfähigkeit | 23.0 °C | 7.00E+6 S/m Show Supplier Material materials with Elektrische Leitfähigkeit of 7.00E+6 S/m |
Specific Electrical conductivity | 12 % IACS Show Supplier Material materials with Specific Electrical conductivity of 12 % IACS |
Chemical properties
Technological properties
Property | ||
---|---|---|
Application areas | AMPCO® 18 rod is produced with a good surface finish to commercial tolerances and can be used economically for volume-production applications. AMPCO® 18 is ideally suited where high strength and hardness combined with wear and fatigue resistance are required. Some of the more common applications of this alloy are bushings, bearings, gears, worm wheels, valve seats and guides, hydraulic valve parts, pump rods, guide pin bushings, gibs and slides, etc. |