Stanyl® TE250F6

Nombres alternativos y comerciales
PA46-GF30 FR(17)

Want to keep this datasheet? Save it now in your required format

Description

Stanyl® is our high-performance polyamide 46 used for applications in automotive, E&E, gears and outdoor power equipments.
Stanyl® is a high performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear & friction and process flow qualities are required.
Because Stanyl retains its mechanical properties at high temperatures up to 220°C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP.

Datasheet URL:

Stanyl® TE250F6

Los datos sobre este material han sido proporcionados por DSM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Condition	Testing Standard	Comment
Absorción de agua	1.7 % Show Supplier Material materials with Absorción de agua of 1.7 %	dry	ISO 62	at 23°C after 24h
	5.9 % Show Supplier Material materials with Absorción de agua of 5.9 %	dry	Sim. to ISO 62
Densidad	1.67 g/cm³ Show Supplier Material materials with Densidad of 1.67 g/cm³	dry	ISO 1183
Moisture absorption	1.8 % Show Supplier Material materials with Moisture absorption of 1.8 %	dry	Sim. to ISO 62
Índice límite de óxigeno	37 % Show Supplier Material materials with Índice límite de óxigeno of 37 %	dry	ISO 4589-1/-2

Mecánica

Property	Temperature	Value	Condition	Thickness	Testing Standard	Comment
Elongación		2.4 % Show Supplier Material materials with Elongación of 2.4 %	dry	1 mm	ISO 527-1/-2
		2.5 % Show Supplier Material materials with Elongación of 2.5 %	dry		ISO 527-1/-2
		3.5 % Show Supplier Material materials with Elongación of 3.5 %	conditioned		ISO 527-1/-2
		3.8 % Show Supplier Material materials with Elongación of 3.8 %	conditioned		ISO 527-1/-2
	120 °C	4 % Show Supplier Material materials with Elongación of 4 %	dry		ISO 527-1/-2
	160 °C	4 % Show Supplier Material materials with Elongación of 4 %	dry		ISO 527-1/-2
Flexural yield strength		190 MPa Show Supplier Material materials with Flexural yield strength of 190 MPa	conditioned		ISO 178
		260 MPa Show Supplier Material materials with Flexural yield strength of 260 MPa	dry		ISO 178
	120 °C	170 MPa Show Supplier Material materials with Flexural yield strength of 170 MPa	dry		ISO 178
	160 °C	140 MPa Show Supplier Material materials with Flexural yield strength of 140 MPa	dry		ISO 178
Módulo de flexión		7.3 GPa Show Supplier Material materials with Módulo de flexión of 7.3 GPa	conditioned		ISO 178
		11 GPa Show Supplier Material materials with Módulo de flexión of 11 GPa	dry		ISO 178
	120 °C	6.5 GPa Show Supplier Material materials with Módulo de flexión of 6.5 GPa	dry		ISO 178
	160 °C	5 GPa Show Supplier Material materials with Módulo de flexión of 5 GPa	dry		ISO 178
Módulo elástico		8 GPa Show Supplier Material materials with Módulo elástico of 8 GPa	conditioned		ISO 527-1/-2
		8 GPa Show Supplier Material materials with Módulo elástico of 8 GPa	conditioned		ISO 527-1/-2
		12 GPa Show Supplier Material materials with Módulo elástico of 12 GPa	dry		ISO 527-1/-2
		12 GPa Show Supplier Material materials with Módulo elástico of 12 GPa	dry	1 mm	ISO 527-1/-2
	120 °C	7.5 GPa Show Supplier Material materials with Módulo elástico of 7.5 GPa	dry		ISO 527-1/-2
	160 °C	6.2 GPa Show Supplier Material materials with Módulo elástico of 6.2 GPa	dry		ISO 527-1/-2
Resistencia a la tracción		120 MPa Show Supplier Material materials with Resistencia a la tracción of 120 MPa	conditioned		ISO 527-1/-2
		120 MPa Show Supplier Material materials with Resistencia a la tracción of 120 MPa	conditioned		ISO 527-1/-2	at low thickness
		180 MPa Show Supplier Material materials with Resistencia a la tracción of 180 MPa	dry		ISO 527-1/-2
		180 MPa Show Supplier Material materials with Resistencia a la tracción of 180 MPa	dry	1 mm	ISO 527-1/-2	at low thickness
	120 °C	105 MPa Show Supplier Material materials with Resistencia a la tracción of 105 MPa	dry		ISO 527-1/-2
	160 °C	95 MPa Show Supplier Material materials with Resistencia a la tracción of 95 MPa	dry		ISO 527-1/-2
Resistencia al choque, ensayo Charpy entallado	-30 °C	10 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 10 kJ/m²	dry, conditioned		ISO 179/1eA
	23 °C	11 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 11 kJ/m²	dry, conditioned		ISO 179/1eA
Resistencia al choque, ensayo Charpy no entallado	-30 °C	50 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 50 kJ/m²	dry, conditioned		ISO 179/1eU
	23 °C	60 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 60 kJ/m²	dry, conditioned		ISO 179/1eU

Aplicaciones térmicas

Property	Value	Condition	Testing Standard	Thickness	Pressure	Comment
Ball pressure temperature	270 °C Show Supplier Material materials with Ball pressure temperature of 270 °C	dry	IEC 60695-10-2
Coeficiente de dilatación térmica	2.5e-07 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 2.5e-07 1/K	dry	ISO 11359-1/-2			Parallel
	5.5e-07 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 5.5e-07 1/K	dry	ISO 11359-1/-2			Normal
Difusividad térmica	1.59e-07 mm²/s Show Supplier Material materials with Difusividad térmica of 1.59e-07 mm²/s	dry	-
Glow Wire Flammability Index	960 °C Show Supplier Material materials with Glow Wire Flammability Index of 960 °C	dry	IEC 60695-2-12	3 mm
	960 °C Show Supplier Material materials with Glow Wire Flammability Index of 960 °C	dry	IEC 60695-2-12	0.75 mm
Glow Wire Ignition Temperature	825 °C Show Supplier Material materials with Glow Wire Ignition Temperature of 825 °C	dry	IEC 60695-2-13	0.75 mm
	850 °C Show Supplier Material materials with Glow Wire Ignition Temperature of 850 °C	dry	IEC 60695-2-13	3 mm
Inflamabilidad	V-0	dry	IEC 60695-11-10	1.5 mm		UL recognition :Yes
Relative temperature index, electrical	140 °C Show Supplier Material materials with Relative temperature index, electrical of 140 °C	dry	UL746B	0.75 mm
Relative temperature index, mechanical impact	110 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 110 °C	dry	UL746B	0.75 mm
Relative temperature index, mechanical strength	120 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 120 °C	dry	UL746B	0.75 mm
Temperatura de flexión bajo carga	290 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 290 °C	dry	ISO 75-1/-2		2 MPa
	290 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 290 °C	dry	ISO 75-1/-2		0.45 MPa
Temperatura de fusión	295 °C Show Supplier Material materials with Temperatura de fusión of 295 °C	dry	ISO 11357-1/-3			10°C/min
Temperatura de reblandecimiento Vicat	290 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 290 °C	dry	ISO 306			50°C/h 50N
Temperatura de transición del vidrio	75 °C Show Supplier Material materials with Temperatura de transición del vidrio of 75 °C	dry	ISO 11357-1/-2			10°C/min

Eléctrico

Property	Value	Condition	Testing Standard	Comment
Constante dieléctrica	3.6 [-] Show Supplier Material materials with Constante dieléctrica of 3.6 [-]	dry	IEC 60250	1GHz
	3.8 [-] Show Supplier Material materials with Constante dieléctrica of 3.8 [-]	conditioned	IEC 60250	1GHz
	4 [-] Show Supplier Material materials with Constante dieléctrica of 4 [-]	dry	IEC 62631-2-1	1MHz
	4.3 [-] Show Supplier Material materials with Constante dieléctrica of 4.3 [-]	dry	IEC 62631-2-1	100Hz
	4.5 [-] Show Supplier Material materials with Constante dieléctrica of 4.5 [-]	conditioned	IEC 62631-2-1	1MHz
	10 [-] Show Supplier Material materials with Constante dieléctrica of 10 [-]	conditioned	IEC 62631-2-1	100Hz
Factor de disipación	60 [-] Show Supplier Material materials with Factor de disipación of 60 [-]	dry	IEC 62631-2-1	100Hz
	160 [-] Show Supplier Material materials with Factor de disipación of 160 [-]	dry	IEC 62631-2-1	1MHz
	250 [-] Show Supplier Material materials with Factor de disipación of 250 [-]	dry	IEC 60250	1GHz
	325 [-] Show Supplier Material materials with Factor de disipación of 325 [-]	conditioned	IEC 60250	1GHz
	700 [-] Show Supplier Material materials with Factor de disipación of 700 [-]	conditioned	IEC 62631-2-1	1MHz
	3300 [-] Show Supplier Material materials with Factor de disipación of 3300 [-]	conditioned	IEC 62631-2-1	100Hz
Rigidez dieléctrica	20 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 20 kV/mm	conditioned	IEC 60243-1
	30 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 30 kV/mm	dry	IEC 60243-1
Surface resistivity	1e+14 Ω/sq Show Supplier Material materials with Surface resistivity of 1e+14 Ω/sq	conditioned	IEC 62631-3-2
Volume resistivity	1e+08 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+08 Ω·cm	conditioned	IEC 62631-3-1
	1e+13 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+13 Ω·cm	dry	IEC 62631-3-1
Índice de seguimiento comparativo	225 V Show Supplier Material materials with Índice de seguimiento comparativo of 225 V	dry	IEC 60112

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Contracción	0.4 % Show Supplier Material materials with Contracción of 0.4 %	dry	Sim. to ISO 294-4	Parallel
	1.1 % Show Supplier Material materials with Contracción of 1.1 %	dry	Sim. to ISO 294-4	Normal
Density of melt	1470 g/cm³ Show Supplier Material materials with Density of melt of 1470 g/cm³	dry	-
Specific heat capacity melt	1480 J/(kg·K) Show Supplier Material materials with Specific heat capacity melt of 1480 J/(kg·K)	dry	-
Spiral flow length	105	dry	-	1.0 mm 800 bar
	115	dry	-	1.0 mm 900 bar
	125	dry	-	1.0 mm 1000 bar
	36	dry	-	0.5mm 1200 bar
	50	dry	-	0.5mm 1600 bar
	74	dry	-	0.5mm 2000 bar
Thermal conductivity of melt	0.344 W/(m·K) Show Supplier Material materials with Thermal conductivity of melt of 0.344 W/(m·K)	dry	-
Viscosity number	145 cm³/gr Show Supplier Material materials with Viscosity number of 145 cm³/gr	dry	ISO 307, 1157, 1628

Technological properties

Property
Application areas	Firefighter helmets, Miniature Circuit Breakers, Reflow connectors, FPC connectors, WtB and BtB Connectors, Battery Connectors, Thermostatic Controls, Hair Curler Brushes, Automotive Connectors, Endlaminates (electro motors), Brushholders (electro motors), Coil insulation, Automotive e-motor Bobbins, Molded case circuit breakers, Motor Starter/Overload Relays, Endlaminates (electrical components), Brushholders (electrical components), Bobbins, Reflow connectors (3)
Certifications	Yellow Card Available
Fillers	30% Glass Fiber

Stanyl® TE250F6

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades