EcoPaXX® Q-KXG10

Nombres alternativos y comerciales
PA410-GF50

Want to keep this datasheet? Save it now in your required format

Description

EcoPaXX® is our bio-based, high-performance polyamide (PA410) that offers outstanding performance across the board, while being made mainly from tropical castor beans which don’t compete with the food chain.
EcoPaXX® belongs to the family of long-chain polyamides, which offer exceptional performance in the most demanding of environments. That includes excellent chemical resistance, low moisture absorption, combined with a very high melting point (highest of all bio-plastics) and high crystallization rate (typical for engineering plastics like PA66 and PA46).
EcoPaXX® has the lowest carbon footprint amongst common polyamides. This is because the amount of carbon dioxide emitted during the production of EcoPaXX® is offset by the amount absorbed in plant growth, and in particular by the riccinus communis – the tropical castor bean plant that makes up some 70% of EcoPaXX®. Externally certified lifecycle analysis (LCA) data is available upon request.

Datasheet URL:

EcoPaXX® Q-KXG10

Los datos sobre este material han sido proporcionados por DSM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Condition	Testing Standard
Absorción de agua	3 % Show Supplier Material materials with Absorción de agua of 3 %	dry	Sim. to ISO 62
Densidad	1.56 g/cm³ Show Supplier Material materials with Densidad of 1.56 g/cm³	dry	ISO 1183
Moisture absorption	1.2 % Show Supplier Material materials with Moisture absorption of 1.2 %	dry	Sim. to ISO 62

Mecánica

Property	Temperature	Value	Condition	Testing Standard
Elongación		3 % Show Supplier Material materials with Elongación of 3 %	dry	ISO 527-1/-2
		3.3 % Show Supplier Material materials with Elongación of 3.3 %	conditioned	ISO 527-1/-2
	120 °C	12 % Show Supplier Material materials with Elongación of 12 %	dry	ISO 527-1/-2
	140 °C	11 % Show Supplier Material materials with Elongación of 11 %	dry	ISO 527-1/-2
	160 °C	10 % Show Supplier Material materials with Elongación of 10 %	dry	ISO 527-1/-2
Flexural yield strength		330 MPa Show Supplier Material materials with Flexural yield strength of 330 MPa	conditioned	ISO 178
		380 MPa Show Supplier Material materials with Flexural yield strength of 380 MPa	dry	ISO 178
Módulo de flexión		15 GPa Show Supplier Material materials with Módulo de flexión of 15 GPa	conditioned	ISO 178
		15.5 GPa Show Supplier Material materials with Módulo de flexión of 15.5 GPa	dry	ISO 178
Módulo elástico		16 GPa Show Supplier Material materials with Módulo elástico of 16 GPa	conditioned	ISO 527-1/-2
		16.5 GPa Show Supplier Material materials with Módulo elástico of 16.5 GPa	dry	ISO 527-1/-2
	120 °C	4.9 GPa Show Supplier Material materials with Módulo elástico of 4.9 GPa	dry	ISO 527-1/-2
	140 °C	4.5 GPa Show Supplier Material materials with Módulo elástico of 4.5 GPa	dry	ISO 527-1/-2
	160 °C	4 GPa Show Supplier Material materials with Módulo elástico of 4 GPa	dry	ISO 527-1/-2
Resistencia a la tracción		210 MPa Show Supplier Material materials with Resistencia a la tracción of 210 MPa	conditioned	ISO 527-1/-2
		240 MPa Show Supplier Material materials with Resistencia a la tracción of 240 MPa	dry	ISO 527-1/-2
	120 °C	75 MPa Show Supplier Material materials with Resistencia a la tracción of 75 MPa	dry	ISO 527-1/-2
	140 °C	60 MPa Show Supplier Material materials with Resistencia a la tracción of 60 MPa	dry	ISO 527-1/-2
	160 °C	50 MPa Show Supplier Material materials with Resistencia a la tracción of 50 MPa	dry	ISO 527-1/-2
Resistencia al choque, ensayo Charpy entallado	-30 °C	13 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 13 kJ/m²	conditioned	ISO 179/1eA
	-30 °C	14.0 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 14.0 kJ/m²	dry	ISO 179/1eA
	23 °C	13 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 13 kJ/m²	conditioned	ISO 179/1eA
	23 °C	16 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 16 kJ/m²	dry	ISO 179/1eA
Resistencia al choque, ensayo Charpy no entallado	-30 °C	75 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 75 kJ/m²	conditioned	ISO 179/1eU
	-30 °C	90 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 90 kJ/m²	dry	ISO 179/1eU
	23 °C	80 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 80 kJ/m²	conditioned	ISO 179/1eU
	23 °C	100 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 100 kJ/m²	dry	ISO 179/1eU

Aplicaciones térmicas

Property	Value	Condition	Testing Standard	Thickness	Pressure	Comment
Coeficiente de dilatación térmica	2e-07 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 2e-07 1/K	dry	ISO 11359-1/-2			Parallel
	1e-06 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1e-06 1/K	dry	ISO 11359-1/-2			Normal
Inflamabilidad	HB	dry	IEC 60695-11-10	1.5 mm		UL recognition :o
Temperatura de flexión bajo carga	200 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 200 °C	dry	ISO 75-1/-2		2 MPa
	235 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 235 °C	dry	ISO 75-1/-2		0.45 MPa
Temperatura de fusión	250 °C Show Supplier Material materials with Temperatura de fusión of 250 °C	dry	ISO 11357-1/-3			10°C/min
Temperatura de transición del vidrio	88 °C Show Supplier Material materials with Temperatura de transición del vidrio of 88 °C	dry	ISO 11357-1/-2			10°C/min

Eléctrico

Property	Value	Condition	Testing Standard
Rigidez dieléctrica	27 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 27 kV/mm	dry	IEC 60243-1

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Contracción	0.15 % Show Supplier Material materials with Contracción of 0.15 %	dry	ISO 294-4	Parallel
	0.5 % Show Supplier Material materials with Contracción of 0.5 %	dry	ISO 294-4	Normal
Spiral flow length	75	dry	-	1.0 mm 800 bar
	90	dry	-	1.0 mm 1000 bar

Technological properties

Property
Fillers	50% Glass Fiber

EcoPaXX® Q-KXG10

Description

Ashby charts

Materiales de este proveedor

Propiedades