Xytron™ G4010T

Nombres alternativos y comerciales
PPS-GF40

Want to keep this datasheet? Save it now in your required format

Description

Xytron™ is a high performance plastic compound of DSM Engineering Plastics, which is based on PPS (polyphenylene sulphide).
Xytron™ offers extremely good chemical resistance, dimensional stability, intrinsic flame retardancy and high stiffness.
Because of its outstanding properties, Xytron™ contributes to an excellent performance in many different applications.

Datasheet URL:

Xytron™ G4010T

Los datos sobre este material han sido proporcionados por DSM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Condition	Testing Standard	Comment
Absorción de agua	0.04 % Show Supplier Material materials with Absorción de agua of 0.04 %	dry	ISO 62	at 23°C after 24h
Densidad	1.65 g/cm³ Show Supplier Material materials with Densidad of 1.65 g/cm³	dry	ISO 1183
Moisture absorption	0.04 % Show Supplier Material materials with Moisture absorption of 0.04 %	dry	Sim. to ISO 62

Mecánica

Property	Temperature	Value	Condition	Testing Standard
Dureza Rockwell M		100 [-] Show Supplier Material materials with Dureza Rockwell M of 100 [-]	dry	ISO 2039-2
Elongación	-40 °C	2 % Show Supplier Material materials with Elongación of 2 %	dry	ISO 527-1/-2
		2 % Show Supplier Material materials with Elongación of 2 %	dry	ISO 527-1/-2
	120 °C	3.1 % Show Supplier Material materials with Elongación of 3.1 %	dry	ISO 527-1/-2
	160 °C	3.9 % Show Supplier Material materials with Elongación of 3.9 %	dry	ISO 527-1/-2
	200 °C	6.4 % Show Supplier Material materials with Elongación of 6.4 %	dry	ISO 527-1/-2
Flexural yield strength		300 MPa Show Supplier Material materials with Flexural yield strength of 300 MPa	dry	ISO 178
	120 °C	150 MPa Show Supplier Material materials with Flexural yield strength of 150 MPa	dry	ISO 178
	160 °C	100 MPa Show Supplier Material materials with Flexural yield strength of 100 MPa	dry	ISO 178
	200 °C	80 MPa Show Supplier Material materials with Flexural yield strength of 80 MPa	dry	ISO 178
Hardness, Rockwell R		121 [-] Show Supplier Material materials with Hardness, Rockwell R of 121 [-]	dry	ISO 2039-2
Módulo de flexión		14.5 GPa Show Supplier Material materials with Módulo de flexión of 14.5 GPa	dry	ISO 178
	120 °C	10 GPa Show Supplier Material materials with Módulo de flexión of 10 GPa	dry	ISO 178
	160 °C	5 GPa Show Supplier Material materials with Módulo de flexión of 5 GPa	dry	ISO 178
	200 °C	4.2 GPa Show Supplier Material materials with Módulo de flexión of 4.2 GPa	dry	ISO 178
Módulo elástico	-40 °C	16 GPa Show Supplier Material materials with Módulo elástico of 16 GPa	dry	ISO 527-1/-2
		15 GPa Show Supplier Material materials with Módulo elástico of 15 GPa	dry	ISO 527-1/-2
	120 °C	7.3 GPa Show Supplier Material materials with Módulo elástico of 7.3 GPa	dry	ISO 527-1/-2
	160 °C	5.2 GPa Show Supplier Material materials with Módulo elástico of 5.2 GPa	dry	ISO 527-1/-2
	200 °C	3.4 GPa Show Supplier Material materials with Módulo elástico of 3.4 GPa	dry	ISO 527-1/-2
Resistencia a la tracción	-40 °C	235 MPa Show Supplier Material materials with Resistencia a la tracción of 235 MPa	dry	ISO 527-1/-2
		200 MPa Show Supplier Material materials with Resistencia a la tracción of 200 MPa	dry	ISO 527-1/-2
	120 °C	105 MPa Show Supplier Material materials with Resistencia a la tracción of 105 MPa	dry	ISO 527-1/-2
	160 °C	73 MPa Show Supplier Material materials with Resistencia a la tracción of 73 MPa	dry	ISO 527-1/-2
	200 °C	55.0 MPa Show Supplier Material materials with Resistencia a la tracción of 55.0 MPa	dry	ISO 527-1/-2
Resistencia al choque, ensayo Charpy entallado	-30 °C	10 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 10 kJ/m²	dry	ISO 179/1eA
	23 °C	10 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 10 kJ/m²	dry	ISO 179/1eA
Resistencia al choque, ensayo Charpy no entallado	-30 °C	57.0 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 57.0 kJ/m²	dry	ISO 179/1eU
	23 °C	48 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 48 kJ/m²	dry	ISO 180/1U
	23 °C	56.0 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 56.0 kJ/m²	dry	ISO 179/1eU

Aplicaciones térmicas

Property	Value	Condition	Testing Standard	Thickness	Pressure	Comment
Coeficiente de dilatación térmica	1.5e-07 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.5e-07 1/K	dry	ISO 11359-1/-2			Parallel
	1.5e-07 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.5e-07 1/K	dry	ISO 11359-1/-2			parallel, above Tg
	4e-07 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 4e-07 1/K	dry	ISO 11359-1/-2			Normal
	1.1e-06 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.1e-06 1/K	dry	ISO 11359-1/-2			normal, above Tg
Inflamabilidad	V-0	dry	IEC 60695-11-10	1.5 mm		UL recognition :Yes
Relative temperature index, electrical	130 °C Show Supplier Material materials with Relative temperature index, electrical of 130 °C	dry	UL746B	0.8 mm
Relative temperature index, mechanical impact	130 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 130 °C	dry	UL746B	0.8 mm
Relative temperature index, mechanical strength	130 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 130 °C	dry	UL746B	0.8 mm
Temperatura de flexión bajo carga	185 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 185 °C	dry	ISO 75-1/-2		8 MPa
	265 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 265 °C	dry	ISO 75-1/-2		2 MPa
	280 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 280 °C	dry	ISO 75-1/-2		0.45 MPa
Temperatura de fusión	280 °C Show Supplier Material materials with Temperatura de fusión of 280 °C	dry	ISO 11357-1/-3			10°C/min
Temperatura de transición del vidrio	90 °C Show Supplier Material materials with Temperatura de transición del vidrio of 90 °C	dry	ISO 11357-1/-2			10°C/min

Eléctrico

Property	Value	Condition	Testing Standard	Comment
Constante dieléctrica	4 [-] Show Supplier Material materials with Constante dieléctrica of 4 [-]	dry	IEC 60250	1GHz
	4 [-] Show Supplier Material materials with Constante dieléctrica of 4 [-]	dry	IEC 60250	5GHz
Factor de disipación	35 [-] Show Supplier Material materials with Factor de disipación of 35 [-]	dry	IEC 60250	1GHz
	55 [-] Show Supplier Material materials with Factor de disipación of 55 [-]	dry	IEC 60250	5GHz
Rigidez dieléctrica	31 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 31 kV/mm	dry	IEC 60234
Surface resistivity	1e+15 Ω/sq Show Supplier Material materials with Surface resistivity of 1e+15 Ω/sq	dry	IEC 62631-3-2
Volume resistivity	1e+13 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+13 Ω·cm	dry	IEC 62631-3-1
Índice de seguimiento comparativo	175 V Show Supplier Material materials with Índice de seguimiento comparativo of 175 V	dry	IEC 60112

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Contracción	0.2 % Show Supplier Material materials with Contracción of 0.2 %	dry	ISO 294-4	Parallel
	0.5 % Show Supplier Material materials with Contracción of 0.5 %	dry	ISO 294-4	Normal
Spiral flow length	111	dry	-	1.0 mm 1000 bar

Technological properties

Property
Application areas	Rod Guides, Charge Air Cooler Caps, Endlaminates (electro motors), Brushholders (electro motors), Coil insulation, Automotive e-motor Bobbins, Filter box, Thermostat push rod, Rectifier, Engine block heater for electric generators, GI Cable Pipe, Power Safety Locking component, Water pump part
Fillers	40% Glass Fiber

Xytron™ G4010T

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades