EN 1706 Grade AC-43500 F

Want to keep this datasheet? Save it now in your required format

Description

Aluminium casting alloy (pressure die casting)

Related Standards

Equivalent Materials

Ashby charts

See where EN 1706 Grade AC-43500 F falls on the material property chart for Density against Elastic modulus in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

Density

ρ

2.65 - 2.7 g/cm³ at 20 °C

Typical for Cast 3xx.x Series Aluminium

Mechanical

Elastic modulus

E

73 - 80 GPa at 20 °C

Show 3xx.x materials with Elastic modulus of 73 - 80 GPa at 20 °C

Typical for Cast 3xx.x Series Aluminium

Elongation A50

A50

5 % at 20 °C

Show 3xx.x materials with Elongation A50 of 5 % at 20 °C

Hardness, Brinell

HB

65 [-] at 20 °C

Show 3xx.x materials with Hardness, Brinell of 65 [-] at 20 °C

Poisson's ratio

ν

0.33 [-] at 20 °C

Show 3xx.x materials with Poisson's ratio of 0.33 [-] at 20 °C

Typical for Cast 3xx.x Series Aluminium

Shear modulus

G

2.8 GPa at 20 °C

Show 3xx.x materials with Shear modulus of 2.8 GPa at 20 °C

Typical for Cast 3xx.x Series Aluminium

Tensile strength

Rm

250 MPa at 20 °C

Show 3xx.x materials with Tensile strength of 250 MPa at 20 °C

Yield strength Rp0.2

Rp0.2

120 MPa at 20 °C

Show 3xx.x materials with Yield strength Rp0.2 of 120 MPa at 20 °C

Thermal

Coefficient of thermal expansion

α

2.1E-5 1/K at 20 °C

Hide chart

Specific heat capacity

cp

960 - 963 J/(kg·K) at 20 °C

Typical for Cast 3xx.x Series Aluminium

Thermal conductivity

λ

140 - 170 W/(m·K) at 20 °C

Electrical

Electrical conductivity

σel

1.90E+7 - 2.50E+7 S/m at 20 °C

Electrical resistivity

ρel

4E-8 - 5.26E-8 Ω·m at 20 °C

Chemical properties

Element

Weight %

Comment

Other

-

each 0.05, total 0.15

Al

86.38 %

Si

9 - 11.5 %

Mn

0.4 - 0.8 %

Fe

0.25 %

More

Technological properties

Anodizing

decorative: not recommended

Corrosion properties

general: good

General machinability

after thermal treatment: good, as cast: good to acceptable

Processing methods

pressure die casting, separately cast test sample

This material data has been provided by WIAM,AluKey.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.