AMPCOLOY® 940 Sand castings

Want to keep this datasheet? Save it now in your required format

Description

AMPCOLOY® 940 is a patented alloy which meets the demands of users of the RWMA class 3 alloys without beryllium. In the industrialized countries, stricter health and safety instructions on the use of noxious elements have forced AMPCO METAL to develop this new alloy. It replaces the AMPCOLOY® 95 in practically all applications.

Equivalent Materials

RWMA Class 3

This material data has been provided by AMPCO METAL.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value
Density	23.0 °C	8.71 g/cm³ Show Supplier Material materials with Density of 8.71 g/cm³
Recycled Content		80 % Show Supplier Material materials with Recycled Content of 80 %

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	23.0 °C	131 GPa Show Supplier Material materials with Elastic modulus of 131 GPa
Elongation A5	23.0 °C	8 % Show Supplier Material materials with Elongation A5 of 8 %
Hardness, HBW	23.0 °C	210 [-] Show Supplier Material materials with Hardness, HBW of 210 [-]	HBW 10/3000
Hardness, Rockwell B	23.0 °C	95 [-] Show Supplier Material materials with Hardness, Rockwell B of 95 [-]
Reduction of area	23.0 °C	18 % Show Supplier Material materials with Reduction of area of 18 %
Tensile strength	23.0 °C	544 MPa Show Supplier Material materials with Tensile strength of 544 MPa
Yield strength Rp0.5	23.0 °C	475 MPa Show Supplier Material materials with Yield strength Rp0.5 of 475 MPa

Thermal

Property	Temperature	Value
Coefficient of thermal expansion	23.0 °C	1.75E-5 1/K Show Supplier Material materials with Coefficient of thermal expansion of 1.75E-5 1/K
Specific heat capacity	23.0 °C	380 J/(kg·K) Show Supplier Material materials with Specific heat capacity of 380 J/(kg·K)
Thermal conductivity	23.0 °C	208 W/(m·K) Show Supplier Material materials with Thermal conductivity of 208 W/(m·K)

Electrical

Property	Temperature	Value
Electrical conductivity	23.0 °C	2.80E+7 S/m Show Supplier Material materials with Electrical conductivity of 2.80E+7 S/m
Specific Electrical conductivity		48 % IACS Show Supplier Material materials with Specific Electrical conductivity of 48 % IACS

Chemical properties

Property	Value
Chromium	0.4 % Show Supplier Material materials with Chromium of 0.4 %
Copper	Balance
Nickel	2.5 % Show Supplier Material materials with Nickel of 2.5 %
Silicon	0.7 % Show Supplier Material materials with Silicon of 0.7 %

Technological properties

Property
Application areas	AMPCOLOY® 940 is used wherever a good electrical or thermal conductivity is required together with high mechanical properties: Electrode holders, parts for energy engineering

AMPCOLOY® 940 Sand castings

Description

Equivalent Materials

Ashby charts

Applications

Materials by this supplier

Use cases

Properties