This website uses cookies to improve service quality. You will find more information about cookies on the privacy policy page.

AMPCO® 8 Rolled sheet and plate

.XLSX
.PDF
Save

Description

AMPCO® 8 is a single phase alloy (100 % alpha) which possesses high tensile and good yield strength and has good properties at high temperatures (260°C) and sub-zero temperatures. AMPCO® 8 is ductile, easily sheared, bent or deep drawn on standard equipment. It has a high impact and fatigue strength. AMPCO® 8 is a fair hot working material which responds favourably to cold working, the only way of increasing its hardness. Correct annealing will remove any cold worked conditions.

Properties

Electrical

Electrical conductivity σel

6.96E+6 S/m at 20 °C

12% I.A.C.S.

General

Density ρ

7.95 g/cm³ at 20 °C

Mechanical

Charpy impact energy aK,charpy

54 - 61 J at 20 °C

Compressive strength Rmc

689 - 862 MPa at 20 °C

Compressive yield strength, 0.1% Rs,0.1

248 MPa at 20 °C

Elastic modulus E

124 GPa at 20 °C

Elongation A5 A5

40 - 42 % at 20 °C

Fatigue strength SNf

145 - 179 MPa at 20 °C

100.000.000 cycles

Hardness, HBW HBW

143 - 153 [-] at 20 °C

HBW 10/3000

Hardness, Rockwell B HRB

78 - 82 [-] at 20 °C

Izod impact energy aK,izod

81 - 88 J at 20 °C

Proportional limit in compression Rpc

145 - 172 MPa at 20 °C

Reduction of area Z

35 - 40 % at 20 °C

Shear strength τ

290 - 359 MPa at 20 °C

Tensile strength Rm

486 - 552 MPa at 20 °C

Yield strength Rp0.5 Rp0.5

234 - 283 MPa at 20 °C

Thermal

Coefficient of thermal expansion α

1.63E-5 1/K at 20 °C

Specific heat capacity cp

420 J/(kg·K) at 20 °C

Thermal conductivity λ

54 W/(m·K) at 20 °C

Chemical properties

Element

Weight %

Comment

Cu

-

balance

Al

6.5 %

Fe

2.5 %

Other

0.5 %

max

Sn

0.25 %

Technological properties

Application areas

AMPCO® 8 sheet and plate has excellent corrosion resistance, not only in alkaline or reducing environments but also in oxydising media. This alloy is ideally suited for applications in the chemical and marine industry. Its inherent wear resistance properties make it well adopted for wear strips and wear plates. Other uses, where both corrosion and wear are factors include chutes, troughs and wear plates in contact with both dry and wet abrasive cereals and crystalline chemicals, etc.

This material data has been provided by AMPCO METAL.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.