Properties
General
| Property | Temperature | Value |
|---|---|---|
Density | 23.0 °C | 7.45 g/cm³ Show Supplier Material materials with Density of 7.45 g/cm³ |
Recycled Content | 80 % Show Supplier Material materials with Recycled Content of 80 % |
Mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Charpy impact energy | 23.0 °C | 12 - 14 J Show Supplier Material materials with Charpy impact energy of 12 - 14 J | |
Compressive strength | 23.0 °C | 980 - 1013 MPa Show Supplier Material materials with Compressive strength of 980 - 1013 MPa | |
Compressive yield strength, 0.1% | 23.0 °C | 262 MPa Show Supplier Material materials with Compressive yield strength, 0.1% of 262 MPa | |
Elastic modulus | 23.0 °C | 117 GPa Show Supplier Material materials with Elastic modulus of 117 GPa | |
Elongation A5 | 23.0 °C | 12 - 14 % Show Supplier Material materials with Elongation A5 of 12 - 14 % | |
Fatigue strength | 23.0 °C | 241 - 248 MPa Show Supplier Material materials with Fatigue strength of 241 - 248 MPa | 100.000.000 cycles |
Hardness, HBW | 23.0 °C | 187 - 202 [-] Show Supplier Material materials with Hardness, HBW of 187 - 202 [-] | HBW 10/3000 |
Hardness, Rockwell B | 23.0 °C | 91 - 94 [-] Show Supplier Material materials with Hardness, Rockwell B of 91 - 94 [-] | |
Izod impact energy | 23.0 °C | 19 - 22 J Show Supplier Material materials with Izod impact energy of 19 - 22 J | |
Proportional limit in compression | 23.0 °C | 221 - 248 MPa Show Supplier Material materials with Proportional limit in compression of 221 - 248 MPa | |
Reduction of area | 23.0 °C | 12 - 14 % Show Supplier Material materials with Reduction of area of 12 - 14 % | |
Shear strength | 23.0 °C | 428 - 448 MPa Show Supplier Material materials with Shear strength of 428 - 448 MPa | |
Tensile strength | 23.0 °C | 655 - 745 MPa Show Supplier Material materials with Tensile strength of 655 - 745 MPa | |
Yield strength Rp0.5 | 23.0 °C | 338 - 379 MPa Show Supplier Material materials with Yield strength Rp0.5 of 338 - 379 MPa |
Thermal
| Property | Temperature | Value |
|---|---|---|
Coefficient of thermal expansion | 23.0 °C | 1.62E-5 1/K Show Supplier Material materials with Coefficient of thermal expansion of 1.62E-5 1/K |
Specific heat capacity | 23.0 °C | 420 J/(kg·K) Show Supplier Material materials with Specific heat capacity of 420 J/(kg·K) |
Thermal conductivity | 23.0 °C | 63 W/(m·K) Show Supplier Material materials with Thermal conductivity of 63 W/(m·K) |
Electrical
| Property | Temperature | Value |
|---|---|---|
Electrical conductivity | 23.0 °C | 7.00E+6 S/m Show Supplier Material materials with Electrical conductivity of 7.00E+6 S/m |
Specific Electrical conductivity | 12 % IACS Show Supplier Material materials with Specific Electrical conductivity of 12 % IACS |
Chemical properties
Technological properties
| Property | ||
|---|---|---|
| Application areas | AMPCO® 18 rod is produced with a good surface finish to commercial tolerances and can be used economically for volume-production applications. AMPCO® 18 is ideally suited where high strength and hardness combined with wear and fatigue resistance are required. Some of the more common applications of this alloy are bushings, bearings, gears, worm wheels, valve seats and guides, hydraulic valve parts, pump rods, guide pin bushings, gibs and slides, etc. | |