General
Property | Temperature | Value | Comment |
---|---|---|---|
Density | 23.0 °C | 1.17 g/cm³ Show Supplier Material materials with Density of 1.17 g/cm³ | ISO 1183 |
Water content | 23.0 °C | 0.1 % Show Supplier Material materials with Water content of 0.1 % | ISO 15512 |
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Elastic modulus | 23.0 °C | 8.5 GPa Show Supplier Material materials with Elastic modulus of 8.5 GPa | ISO 527-2 (1mm/min) |
Elongation | 23.0 °C | 2 % Show Supplier Material materials with Elongation of 2 % | ISO 527-2 (5mm/min) |
Flexural modulus | 23.0 °C | 7 GPa Show Supplier Material materials with Flexural modulus of 7 GPa | ISO 178 (2mm/min) |
Flexural strength | 23.0 °C | 210 MPa Show Supplier Material materials with Flexural strength of 210 MPa | ISO 178 (2mm/min) |
Impact strength, Charpy notched | 23.0 °C | 6 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 6 kJ/m² | ISO 179/1eA |
Impact strength, Charpy unnotched | 23.0 °C | 30 kJ/m² Show Supplier Material materials with Impact strength, Charpy unnotched of 30 kJ/m² | ISO 179/1eU |
Impact strength, Izod notched | 23.0 °C | 5 kJ/m² Show Supplier Material materials with Impact strength, Izod notched of 5 kJ/m² | ISO 180/1A |
Impact strength, Izod unnotched | 23.0 °C | 25 kJ/m² Show Supplier Material materials with Impact strength, Izod unnotched of 25 kJ/m² | ISO 180/1U |
Tensile strength | 23.0 °C | 120 MPa Show Supplier Material materials with Tensile strength of 120 MPa | ISO 527-2 (5mm/min) |
Thermal
Property | Temperature | Value | Comment | ||
---|---|---|---|---|---|
Ash content | 23.0 °C | 10 % Show Supplier Material materials with Ash content of 10 % | ISO 3451-4 | ||
Heat deflection temperature, 0.45 MPa | 210 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 210 °C | ISO 75-2/B | |||
Heat deflection temperature, 1.80 MPa | 190 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 190 °C | ISO 75-2/A | |||
Melting point | 220 °C Show Supplier Material materials with Melting point of 220 °C | ISO 3146 | |||
Flammability | UL94 (0.8mm) HB, EN 60695-11-10 |
Electrical
Property | Temperature | Value | Comment |
---|---|---|---|
Surface resistivity | 23.0 °C | 1000000 Ω/sq Show Supplier Material materials with Surface resistivity of 1000000 Ω/sq | ASTM D257 |
Rheological Properties
Technological properties
Property | ||
---|---|---|
Application areas | Eplamid 6 carbon fiber reinforced compounds are used in all sectors of industry, offering a good balance of thermal and mechanical properties. | |
Fillers | 10% Carbon Fiber | |
Other | Laboratory conditions are 23 ±2°C and 45-55 % RH. |