BioBlend® XD 22620©

Alternative and trade names
BioBlend® XD 22620

Want to keep this datasheet? Save it now in your required format

Description

A member of the BioBlend® XD Family of Durable BioPolymers for blow molding. BioBlend® XD 22620 contains 50% NuPlastiQ compounded with HDPE. Made from 50% annually renewable agricultural resources. Properties values are typical properties only and should not be used for specification purposes. End users should confirm results with their own tests. Mechanical properties were tested by down blending the 50% masterbatch with additional HDPE to a final concentration of 20% NuPlastiQ.

This material data has been provided by Feconix Pte Ltd.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Value	Comment
Bio-based content	20 % Show Supplier Material materials with Bio-based content of 20 %
	50 % Show Supplier Material materials with Bio-based content of 50 %
Density	1.17 g/cm³ Show Supplier Material materials with Density of 1.17 g/cm³	Calculated

Mechanical

Property	Value	Comment
Elastic modulus	0.65 GPa Show Supplier Material materials with Elastic modulus of 0.65 GPa	ASTM D638
Flexural modulus	0.618 GPa Show Supplier Material materials with Flexural modulus of 0.618 GPa	ASTM D790
Flexural strength	25 MPa Show Supplier Material materials with Flexural strength of 25 MPa	ASTM D790
Tensile strength	16 MPa Show Supplier Material materials with Tensile strength of 16 MPa	ASTM D638

Thermal

Property	Value	Comment
Melting point	130 °C Show Supplier Material materials with Melting point of 130 °C	ASTM D3418

Rheological Properties

Property	Value	Comment
Melt mass-flow rate	1.3 g/10min Show Supplier Material materials with Melt mass-flow rate of 1.3 g/10min	ASTM D1238 (190°C/10 kg)

Technological properties

Property

Application areas

BioBlend® XD 22620 is designed for blow molding applications that require stress crack resistance, rigidity, and high impact strength.

Certifications

USDA Certified Bio-based product

BioBlend® XD 22620©

Description

Ashby charts

Applications

Materials by this supplier

Properties