Polyethylene Terephthalate (PET) Granule (ES306312)

Alternative and trade names
Polyethylene Terephthalate (PET) Granule (ES306312)


Polyethylene Terephthalate granules have cylindrical shape. It is a food grade copolymer fast reheat resin engineered to deliver the most efficient injection moulding and blowing while maintaining excellent colour characteristics.

It builds upon the established combination of slow crystallisation at moulding and reduced energy consumption at blowing which results in energy and cycle time reduction versus conventional resins. It is also suitable for conversion into extruded sheet and thermoformed containers.



Bulk density ρbulk

0.84 g/cm³ at 20 °C

Crystallinity ccryst

48 % at 20 °C

Density ρ

1.39 g/cm³ at 20 °C

Particle mass mpart

19 mg at 20 °C

Water absorption cwater

0.2 % at 20 °C


Glass transition temperature Tg

83 °C

Melting point Tm

248 °C

Technological properties

Processing methods

Blow molding, injection molding, sheet extrusion, thermoforming

This material data has been provided by Goodfellow.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.