PEEK CF30

Alternative and trade names
PEEK-I-CF30
Want to keep this datasheet? Save it now in your required format

This material data has been provided by Xiamen Keyuan Plastic Co., Ltd.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.42 g/cm³

Show Supplier Material materials with Density of 1.42 g/cm³

ASTM D792

Mechanical

PropertyTemperatureValueComment

Elongation

23.0 °C

1 %

Show Supplier Material materials with Elongation of 1 %

ASTM D638

Flexural modulus

23.0 °C

15.9 GPa

Show Supplier Material materials with Flexural modulus of 15.9 GPa

ASTM D790

Flexural strength

23.0 °C

248 MPa

Show Supplier Material materials with Flexural strength of 248 MPa

ASTM D790

Impact strength, Charpy notched, ASTM

23.0 °C

85 J/m

Show Supplier Material materials with Impact strength, Charpy notched, ASTM of 85 J/m

ASTM D256

Tensile strength

23.0 °C

214 MPa

Show Supplier Material materials with Tensile strength of 214 MPa

ASTM D638

Thermal

PropertyValueComment

Heat deflection temperature, 1.80 MPa

288 °C

Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 288 °C

ASTM D648

Flammability

UL94 v0

Rheological Properties

PropertyTemperatureValue

Shrinkage

23.0 °C

0.1 %

Show Supplier Material materials with Shrinkage of 0.1 %

Technological properties

Property
Application areas

Aircraft parts, engine inner covers, bearings, gaskets, seals, clutch gear rings, valves and pumps, semiconductor industry, chemical industry, bars, surgical and dental equipment, military materials

Fillers

30% Carbon Fiber