Delon 6055

Alternative and trade names
Delon 6055

Want to keep this datasheet? Save it now in your required format

Description

Delon is a copolymer composed of an aromatic polyester as the hard element and an aliphatic polyether as the soft element. As well as Hytrel TEEE, Delon has excellent heat-aging resistance and oil resistance.

This material data has been provided by Lingen Plastic Rubber Co..

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Properties

General

Property	Temperature	Value	Comment
Density	23.0 °C	1.2 g/cm³ Show Supplier Material materials with Density of 1.2 g/cm³	ASTM D792

Mechanical

Property	Temperature	Value	Comment
Elongation	23.0 °C	450 % Show Supplier Material materials with Elongation of 450 %	ASTM D412
Flexural strength	23.0 °C	198 MPa Show Supplier Material materials with Flexural strength of 198 MPa
Hardness, Shore D	23.0 °C	55 [-] Show Supplier Material materials with Hardness, Shore D of 55 [-]	ASTM D2240
Tear strength	23.0 °C	147 kN/m Show Supplier Material materials with Tear strength of 147 kN/m	ASTM D624
Tensile strength	23.0 °C	23 MPa Show Supplier Material materials with Tensile strength of 23 MPa	ASTM D412

Thermal

Property	Value	Comment
Brittleness temperature	-70 °C Show Supplier Material materials with Brittleness temperature of -70 °C	D746
Melting point	200 °C Show Supplier Material materials with Melting point of 200 °C
Vicat softening temperature	170 °C Show Supplier Material materials with Vicat softening temperature of 170 °C

Technological properties

Property
Processing methods	Pre-drying: 100°C for 4-8 hr, Injection temperature: 10-20°C higher than melting temperature, Extrusion and blow temperature: higher than melting temperature

Delon 6055

Description

Ashby charts

Materials by this supplier

Properties