General
Property | Temperature | Value | Comment |
---|---|---|---|
Density | 23.0 °C | 1.22 g/cm³ Show Supplier Material materials with Density of 1.22 g/cm³ | ASTM D792 |
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Elongation | 23.0 °C | 400 % Show Supplier Material materials with Elongation of 400 % | ASTM D412 |
Flexural strength | 23.0 °C | 300 MPa Show Supplier Material materials with Flexural strength of 300 MPa | |
Hardness, Shore D | 23.0 °C | 60 [-] Show Supplier Material materials with Hardness, Shore D of 60 [-] | ASTM D2240 |
Tear strength | 23.0 °C | 160 kN/m Show Supplier Material materials with Tear strength of 160 kN/m | ASTM D624 |
Tensile strength | 23.0 °C | 25 MPa Show Supplier Material materials with Tensile strength of 25 MPa | ASTM D412 |
Thermal
Property | Value | Comment |
---|---|---|
Brittleness temperature | -50 °C Show Supplier Material materials with Brittleness temperature of -50 °C | D746 |
Melting point | 210 °C Show Supplier Material materials with Melting point of 210 °C | |
Vicat softening temperature | 190 °C Show Supplier Material materials with Vicat softening temperature of 190 °C |
Technological properties
Property | ||
---|---|---|
Processing methods | Pre-drying: 100°C for 4-8 hr, Injection temperature: 10-20°C higher than melting temperature, Extrusion and blow temperature: higher than melting temperature |