Tungsten Alloy EF 18N*

Want to keep this datasheet? Save it now in your required format

Description

Tungsten alloys, which contain elements such as nickel, copper and iron, produce a host of alloys which have engineering properties similar to steel, are relatively easy to machine, and can be plated or painted to enhance their corrosion protection. These alloys are approximately 50% denser than lead resulting in a higher concentration of mass in a limited area.

Related Standards

Equivalent Materials

Ashby charts

See where Tungsten Alloy EF 18N* falls on the material property chart for Density against Elastic modulus in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

Density

ρ

18 g/cm³ at 20 °C

Mechanical

Elastic modulus

E

345 GPa at 20 °C

Show Tungsten materials with Elastic modulus of 345 GPa at 20 °C

Elongation

A

1 % at 20 °C

Show Tungsten materials with Elongation of 1 % at 20 °C

Hardness, Rockwell C

HRC

34 [-] at 20 °C

Show Tungsten materials with Hardness, Rockwell C of 34 [-] at 20 °C

Tensile strength

Rm

648 MPa at 20 °C

Show Tungsten materials with Tensile strength of 648 MPa at 20 °C

Yield strength

YS

517 MPa at 20 °C

Show Tungsten materials with Yield strength of 517 MPa at 20 °C

Chemical properties

Element

Weight %

Comment

W

95 %

Technological properties

Application areas

Common applications of Tungsten Alloys: Radiation shielding, boring bars, counterweights in aircraft and racing cars

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.