DIN 1725-2 Grade 3.3261 F

Want to keep this datasheet? Save it now in your required format

Description

The alloy G-AlMg5Si is good castable and poses excellent weather and corrosion resistance. It is especially applicable for difficult castings with higher demands on impact strength and surface quality. It is also excellent polishable. Application: ship, automotive and aircraft construction, decorative castings, chemical and fodd industry, fittings and claddings

Related Standards

Equivalent Materials

This material data has been provided by WIAM,AluKey.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueConditionRelated Standards

Density

2.6 g/cm³

Show Material materials with Density of 2.6 g/cm³

F

EN 1706

20.0 °C

2.6 g/cm³

Show Material materials with Density of 2.6 g/cm³

F

DIN 1725-2, EN 1676, EN 1706

Mechanical

PropertyTemperatureValueConditionRelated StandardsComment

Bending Fatigue Strength

60.0 - 90.0 MPa

Show Material materials with Bending Fatigue Strength of 60.0 - 90.0 MPa

F

EN 1706

Elastic modulus

69.0 GPa

Show Material materials with Elastic modulus of 69.0 GPa

F

EN 1706

20.0 °C

69.0 GPa

Show Material materials with Elastic modulus of 69.0 GPa

F

DIN 1725-2, EN 1676, EN 1706

Elongation

-196.0 °C

2.9 %

Show Material materials with Elongation of 2.9 %

F

DIN 1725-2, EN 1676, EN 1706

-196.0 °C

3.3 %

Show Material materials with Elongation of 3.3 %

F

DIN 1725-2, EN 1676, EN 1706

-120.0 °C

2.6 %

Show Material materials with Elongation of 2.6 %

F

DIN 1725-2, EN 1676, EN 1706

-120.0 °C

3.9 %

Show Material materials with Elongation of 3.9 %

F

DIN 1725-2, EN 1676, EN 1706

-50.0 °C

3.4 %

Show Material materials with Elongation of 3.4 %

F

DIN 1725-2, EN 1676, EN 1706

-50.0 °C

4.3 %

Show Material materials with Elongation of 4.3 %

F

DIN 1725-2, EN 1676, EN 1706

3.0 %

Show Material materials with Elongation of 3.0 %

F

EN 1706

A50

20.0 °C

1.0 %

Show Material materials with Elongation of 1.0 %

F

DIN 1725-2, EN 1676, EN 1706

20.0 °C

2.0 - 5.0 %

Show Material materials with Elongation of 2.0 - 5.0 %

F

DIN 1725-2, EN 1676, EN 1706

20.0 °C

2.0 - 4.0 %

Show Material materials with Elongation of 2.0 - 4.0 %

F

DIN 1725-2, EN 1676, EN 1706

20.0 °C

3.0 %

Show Material materials with Elongation of 3.0 %

F

DIN 1725-2, EN 1676, EN 1706

20.0 °C

3.8 %

Show Material materials with Elongation of 3.8 %

F

DIN 1725-2, EN 1676, EN 1706

Hardness, Brinell

60.0 [-]

Show Material materials with Hardness, Brinell of 60.0 [-]

F

EN 1706

65.0 [-]

Show Material materials with Hardness, Brinell of 65.0 [-]

F

EN 1706

20.0 °C

55.0 [-]

Show Material materials with Hardness, Brinell of 55.0 [-]

F

DIN 1725-2, EN 1676, EN 1706

20.0 °C

60.0 [-]

Show Material materials with Hardness, Brinell of 60.0 [-]

F

DIN 1725-2, EN 1676, EN 1706

20.0 °C

60.0 - 75.0 [-]

Show Material materials with Hardness, Brinell of 60.0 - 75.0 [-]

F

DIN 1725-2, EN 1676, EN 1706

20.0 °C

65.0 - 85.0 [-]

Show Material materials with Hardness, Brinell of 65.0 - 85.0 [-]

F

DIN 1725-2, EN 1676, EN 1706

Poisson's ratio

0.33 [-]

Show Material materials with Poisson's ratio of 0.33 [-]

Typical for Cast 5xx.x Series Aluminium

Shear strength

20.0 °C

138.0 MPa

Show Material materials with Shear strength of 138.0 MPa

F

DIN 1725-2, EN 1676, EN 1706

20.0 °C

150.0 MPa

Show Material materials with Shear strength of 150.0 MPa

F

DIN 1725-2, EN 1676, EN 1706

Tensile strength

-196.0 °C

198.0 MPa

Show Material materials with Tensile strength of 198.0 MPa

F

DIN 1725-2, EN 1676, EN 1706

-196.0 °C

219.0 MPa

Show Material materials with Tensile strength of 219.0 MPa

F

DIN 1725-2, EN 1676, EN 1706

-120.0 °C

175.0 MPa

Show Material materials with Tensile strength of 175.0 MPa

F

DIN 1725-2, EN 1676, EN 1706

-120.0 °C

203.0 MPa

Show Material materials with Tensile strength of 203.0 MPa

F

DIN 1725-2, EN 1676, EN 1706

-50.0 °C

172.0 MPa

Show Material materials with Tensile strength of 172.0 MPa

F

DIN 1725-2, EN 1676, EN 1706

-50.0 °C

187.0 MPa

Show Material materials with Tensile strength of 187.0 MPa

F

DIN 1725-2, EN 1676, EN 1706

160.0 MPa

Show Material materials with Tensile strength of 160.0 MPa

F

EN 1706

180.0 MPa

Show Material materials with Tensile strength of 180.0 MPa

F

EN 1706

20.0 °C

140.0 MPa

Show Material materials with Tensile strength of 140.0 MPa

F

DIN 1725-2, EN 1676, EN 1706

20.0 °C

150.0 MPa

Show Material materials with Tensile strength of 150.0 MPa

F

DIN 1725-2, EN 1676, EN 1706

20.0 °C

157.0 MPa

Show Material materials with Tensile strength of 157.0 MPa

F

DIN 1725-2, EN 1676, EN 1706

20.0 °C

160.0 - 200.0 MPa

Show Material materials with Tensile strength of 160.0 - 200.0 MPa

F

DIN 1725-2, EN 1676, EN 1706

20.0 °C

180.0 - 240.0 MPa

Show Material materials with Tensile strength of 180.0 - 240.0 MPa

F

DIN 1725-2, EN 1676, EN 1706

20.0 °C

184.0 MPa

Show Material materials with Tensile strength of 184.0 MPa

F

DIN 1725-2, EN 1676, EN 1706

Thermal

PropertyTemperatureValueConditionRelated Standards

Coefficient of thermal expansion

20 °C

2.4e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.4e-05 1/K

F

DIN 1725-2, EN 1676, EN 1706

100 °C

2.4e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.4e-05 1/K

F

DIN 1725-2, EN 1676, EN 1706

200.0 °C

2.4e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.4e-05 1/K

F

DIN 1725-2, EN 1676, EN 1706

Melting point

550.0 - 630.0 °C

Show Material materials with Melting point of 550.0 - 630.0 °C

F

EN 1706

Specific heat capacity

930.0 J/(kg·K)

Show Material materials with Specific heat capacity of 930.0 J/(kg·K)

F

EN 1706

20.0 °C

930.0 J/(kg·K)

Show Material materials with Specific heat capacity of 930.0 J/(kg·K)

F

DIN 1725-2, EN 1676, EN 1706

Thermal conductivity

110.0 - 140.0 W/(m·K)

Show Material materials with Thermal conductivity of 110.0 - 140.0 W/(m·K)

F

EN 1706

20.0 °C

110.0 - 130.0 W/(m·K)

Show Material materials with Thermal conductivity of 110.0 - 130.0 W/(m·K)

F

DIN 1725-2, EN 1676, EN 1706

Electrical

PropertyTemperatureValueConditionRelated Standards

Electrical conductivity

15000000.0 - 21000000.0 S/m

Show Material materials with Electrical conductivity of 15000000.0 - 21000000.0 S/m

F

EN 1706

20.0 °C

15000000.0 - 19000000.0 S/m

Show Material materials with Electrical conductivity of 15000000.0 - 19000000.0 S/m

F

DIN 1725-2, EN 1676, EN 1706

Electrical resistivity

4.76e-08 - 6.67e-08 Ω·m

Show Material materials with Electrical resistivity of 4.76e-08 - 6.67e-08 Ω·m

F

EN 1706

Chemical properties

PropertyValueConditionRelated Standards

Aluminium

91.6 %

Show Material materials with Aluminium of 91.6 %

F

DIN 1725-2, EN 1676, EN 1706

Copper

0.05 %

Show Material materials with Copper of 0.05 %

F

DIN 1725-2, EN 1676, EN 1706

Iron

0.5 %

Show Material materials with Iron of 0.5 %

F

DIN 1725-2, EN 1676, EN 1706

0.50 %

Show Material materials with Iron of 0.50 %

F

EN 1706

Magnesium

4.5 - 5.5 %

Show Material materials with Magnesium of 4.5 - 5.5 %

F

DIN 1725-2, EN 1676, EN 1706

Manganese

0.001 - 0.4 %

Show Material materials with Manganese of 0.001 - 0.4 %

F

DIN 1725-2, EN 1676, EN 1706

Silicon

0.9 - 1.5 %

Show Material materials with Silicon of 0.9 - 1.5 %

F

DIN 1725-2, EN 1676, EN 1706

Titanium

0.001 - 0.2 %

Show Material materials with Titanium of 0.001 - 0.2 %

F

DIN 1725-2, EN 1676, EN 1706

Zinc

0.1 %

Show Material materials with Zinc of 0.1 %

F

DIN 1725-2, EN 1676, EN 1706

Technological properties

Property
Anodizing

decorative: good

Corrosion properties

general: excellent

General machinability

after thermal treatment: excellent

Processing methods

permanent mould casting