Pink Sheets Grade 356.0 T71

Want to keep this datasheet? Save it now in your required format

Related Standards

Equivalent Materials

This material data has been provided by MakeItFrom.com,ASM Handbook Volume 2 Properties and Selection: Nonferrous oys and Special-Purpose Materials,AluKey.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValue

Density

23.0 °C

2.7 g/cm³

Show Material materials with Density of 2.7 g/cm³

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

72 - 72.4 GPa

Show Material materials with Elastic modulus of 72 - 72.4 GPa

Elongation

23.0 °C

3.5 %

Show Material materials with Elongation of 3.5 %

Sand cast, elongation in 50 mm

Elongation A100

23.0 °C

3 %

Show Material materials with Elongation A100 of 3 %

Fatigue strength

23.0 °C

59 MPa

Show Material materials with Fatigue strength of 59 MPa

for 5x10⁸ cycles, R.R. Moore type test

Hardness, Brinell

23.0 °C

60 - 70 [-]

Show Material materials with Hardness, Brinell of 60 - 70 [-]

500 kg load, 10 mm b

Poisson's ratio

23.0 °C

0.33 [-]

Show Material materials with Poisson's ratio of 0.33 [-]

Shear modulus

23.0 °C

27.2 GPa

Show Material materials with Shear modulus of 27.2 GPa

Shear strength

23.0 °C

138 MPa

Show Material materials with Shear strength of 138 MPa

Tensile strength

23.0 °C

150 - 193 MPa

Show Material materials with Tensile strength of 150 - 193 MPa

Sand cast

Yield strength

23.0 °C

140 MPa

Show Material materials with Yield strength of 140 MPa

Yield strength Rp0.2

23.0 °C

125 - 145 MPa

Show Material materials with Yield strength Rp0.2 of 125 - 145 MPa

Sand cast

Thermal

PropertyTemperatureValue

Coefficient of thermal expansion

23.0 °C

2.2E-5 1/K

Show Material materials with Coefficient of thermal expansion of 2.2E-5 1/K

Melting point

557 - 613 °C

Show Material materials with Melting point of 557 - 613 °C

Specific heat capacity

23.0 °C

970 J/(kg·K)

Show Material materials with Specific heat capacity of 970 J/(kg·K)

Thermal conductivity

23.0 °C

160 W/(m·K)

Show Material materials with Thermal conductivity of 160 W/(m·K)

Chemical properties

PropertyValueComment

Aluminium

90.1 - 93.3 %

Show Material materials with Aluminium of 90.1 - 93.3 %

Copper

0 - 0.25 %

Show Material materials with Copper of 0 - 0.25 %

Iron

0 - 0.6 %

Show Material materials with Iron of 0 - 0.6 %

Magnesium

0.2 - 0.45 %

Show Material materials with Magnesium of 0.2 - 0.45 %

Manganese

0 - 0.35 %

Show Material materials with Manganese of 0 - 0.35 %

Other

0 - 0.15 %

Show Material materials with Other of 0 - 0.15 %

each 0.05, total 0.15, Rest Al

Silicon

6.5 - 7.5 %

Show Material materials with Silicon of 6.5 - 7.5 %

Titanium

0 - 0.25 %

Show Material materials with Titanium of 0 - 0.25 %

Zinc

0 - 0.35 %

Show Material materials with Zinc of 0 - 0.35 %