Epoxy RT500 - Tube

Alternative and trade names
NEMA GRADE: G-10, U.L. LISTED: N
Want to keep this datasheet? Save it now in your required format

Description

The RT500 series has good electrical properties under humid conditions, excellent heat resistance and mechanical properties. RT500 grades are available in medium or fine weave fabrics. It also complies with MIL-I-24768/2, Type GEE and ASTM D709 Type IV Grade G-10.

This material data has been provided by Norplex Micarta.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

General

PropertyValueTesting StandardComment

Density

1.8 g/cm³

Show Supplier Material materials with Density of 1.8 g/cm³

ASTM D792

Moisture absorption

0.14 %

Show Supplier Material materials with Moisture absorption of 0.14 %

ASTM D570

Condition D₁-24/23

Mechanical

PropertyValueTesting StandardComment

Compressive modulus

7.6 GPa

Show Supplier Material materials with Compressive modulus of 7.6 GPa

ASTM D695

Condition A

Compressive strength

293.0 MPa

Show Supplier Material materials with Compressive strength of 293.0 MPa

ASTM D695

Condition A

Hardness, Rockwell M

110 [-]

Show Supplier Material materials with Hardness, Rockwell M of 110 [-]

ASTM D785

Tensile strength

272.3 MPa

Show Supplier Material materials with Tensile strength of 272.3 MPa

ASTM D638

Condition A

Thermal

PropertyValueComment

Glass transition temperature

170 °C

Show Supplier Material materials with Glass transition temperature of 170 °C

min. | DMA

Relative temperature index, electrical

200 °C

Show Supplier Material materials with Relative temperature index, electrical of 200 °C

¹

Relative temperature index, mechanical strength

200 °C

Show Supplier Material materials with Relative temperature index, mechanical strength of 200 °C

¹

Flammability

UL Bulletin 94, Class HB

Electrical

PropertyValueTesting StandardFrequencyComment

Breakdown voltage

60 kV

Show Supplier Material materials with Breakdown voltage of 60 kV

ASTM D149

Condition A

65 kV

Show Supplier Material materials with Breakdown voltage of 65 kV

ASTM D149

Condition D-48/50

Dielectric constant

4.39 [-]

Show Supplier Material materials with Dielectric constant of 4.39 [-]

ASTM D150

1MHz

Condition A

4.46 [-]

Show Supplier Material materials with Dielectric constant of 4.46 [-]

ASTM D150

1MHz

Condition D-24/23

Dielectric strength

14.96 kV/mm

Show Supplier Material materials with Dielectric strength of 14.96 kV/mm

ASTM D149

Condition D-48/50

15.75 kV/mm

Show Supplier Material materials with Dielectric strength of 15.75 kV/mm

ASTM D149

Condition A

Dissipation factor

0.024 [-]

Show Supplier Material materials with Dissipation factor of 0.024 [-]

ASTM D150

1MHz

Condition A

0.034 [-]

Show Supplier Material materials with Dissipation factor of 0.034 [-]

ASTM D150

1MHz

Condition D-24/23

Technological properties

Property
Fillers

Glass Fabric

Other

1.This temperature is a recommendation only, and based upon experience in various applications. The maximum operating temperature is dependent upon the application and should be investigated prior to use


2.The mechanical properties are converted from American unit system to International unit system.

Supplier Disclaimer

This data, while believed to be accurate and based on reliable analytical methods, is for informational purposes only. The terms and conditions of the agreement under which it is sold will govern any sales of this product. Data supplied above are "typical values"; not to be considered "specification values".


To assure the material's performance is adequate for a specific application; customers should verify, independent of Norplex-Micarta, performance characteristics of interest.


It is the responsibility of the users of this information to make sure that they have the latest version of this TDB, and are urged to check with Customer Service or, preferably our web site, www.norplex-micarta.com, to determine if the information is the most current available.