Phenolic RM504 - Rod

Alternative and trade names
NEMA GRADE: G-3 Type, U.L. LISTED: N
Want to keep this datasheet? Save it now in your required format

Description

Rolled and Molded Rods made from a woven fiber-glass cloth combined with a phenolic resin system. RM504 is used for mechanical applications and electrical applications, at low voltages. It has very good thermal resistance and ablative properties.

This material data has been provided by Norplex Micarta.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.79 g/cm³

Show Supplier Material materials with Density of 1.79 g/cm³

ASTM D349

Moisture absorption

23.0 °C

0.04 %

Show Supplier Material materials with Moisture absorption of 0.04 %

ASTM D570, Condition D₁-24/23

Mechanical

PropertyTemperatureValueComment

Compressive strength

23.0 °C

468.84 MPa

Show Supplier Material materials with Compressive strength of 468.84 MPa

ASTM D349, Condition A

Flexural strength

23.0 °C

411.62 MPa

Show Supplier Material materials with Flexural strength of 411.62 MPa

ASTM D349, Condition A

Hardness, Rockwell M

23.0 °C

110 [-]

Show Supplier Material materials with Hardness, Rockwell M of 110 [-]

ASTM D349

Tensile strength

23.0 °C

255.11 MPa

Show Supplier Material materials with Tensile strength of 255.11 MPa

ASTM D349, Condition A

Thermal

PropertyValueComment

Relative temperature index, electrical

140 °C

Show Supplier Material materials with Relative temperature index, electrical of 140 °C

¹

Relative temperature index, mechanical strength

170 °C

Show Supplier Material materials with Relative temperature index, mechanical strength of 170 °C

¹

Flammability

UL 94, Class HB

Technological properties

Property
Application areas

It can and is used as a substitute for silicon glass materials in many applications.

Fillers

Glass Fabric

Other

1.This temperature is a recommendation only, and based upon experience in various applications. The maximum operating temperature is dependent upon the application and should be investigated prior to use


2.The mechanical properties are converted from American unit system to International unit system.

Supplier Disclaimer

This data, while believed to be accurate and based on reliable analytical methods, is for informational purposes only. The terms and conditions of the agreement under which it is sold will govern any sales of this product. Data supplied above are "typical values"; not to be considered "specification values".


To assure the material's performance is adequate for a specific application; customers should verify, independent of Norplex-Micarta, performance characteristics of interest.


It is the responsibility of the users of this information to make sure that they have the latest version of this TDB, and are urged to check with Customer Service or, preferably our web site, www.norplex-micarta.com, to determine if the information is the most current available.