Phenolic MC514MG - Sheet

Alternative and trade names
U.L. LISTED: N

Want to keep this datasheet? Save it now in your required format

Description

MC514MG is a glass phenolic, semi-conductive laminate which was designed for corona discharge in the power generation industry. The graphitic carbon additive in the resin system enables easy installation in the slots and provides the necessary conductivity to safely remove harmful charges from the system.

This material data has been provided by Norplex Micarta.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Properties

General

Property	Value	Testing Standard	Comment
Bonding strength	499 Kg Show Supplier Material materials with Bonding strength of 499 Kg	ASTM D229	Condition A
Density	1.8 g/cm³ Show Supplier Material materials with Density of 1.8 g/cm³	ASTM D792

Mechanical

Property	Value	Testing Standard	Comment
Compressive strength	330.9 MPa Show Supplier Material materials with Compressive strength of 330.9 MPa	ASTM D695	Condition A \| Flatwise
Flexural strength	172.4 MPa Show Supplier Material materials with Flexural strength of 172.4 MPa	ASTM D790	Condition A, Transverse
	234.4 MPa Show Supplier Material materials with Flexural strength of 234.4 MPa	ASTM D790	Condition A
Hardness, Rockwell M	110 [-] Show Supplier Material materials with Hardness, Rockwell M of 110 [-]	ASTM D785

Thermal

Property	Value	Comment
Relative temperature index, mechanical strength	155 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 155 °C	UL Bulletin 746b¹

Electrical

Property	Value	Testing Standard
Surface resistivity	400 - 20000 Ω/sq Show Supplier Material materials with Surface resistivity of 400 - 20000 Ω/sq	ASTM D257

Technological properties

Property

Fillers

Glass Fabric

Other

1.This temperature is a recommendation only, and based upon experience in various applications. The maximum operating temperature is dependent upon the application and should be investigated prior to use.

Supplier Disclaimer

This data, while believed to be accurate and based on reliable analytical methods, is for informational purposes only. The terms and conditions of the agreement under which it is sold will govern any sales of this product. Data supplied above are "typical values"; not to be considered "specification values".

To assure the material's performance is adequate for a specific application; customers should verify, independent of Norplex-Micarta, performance characteristics of interest.

It is the responsibility of the users of this information to make sure that they have the latest version of this TDB, and are urged to check with Customer Service or, preferably our web site, www.norplex-micarta.com, to determine if the information is the most current available.

Phenolic MC514MG - Sheet

Description

Ashby charts

Materials by this supplier

Use cases

Properties