Properties
General
| Property | Temperature | Value | Comment |
|---|---|---|---|
Density | 23.0 °C | 1.29 g/cm³ Show Supplier Material materials with Density of 1.29 g/cm³ | ASTM D792 |
Moisture absorption | 23.0 °C | 1.2 % Show Supplier Material materials with Moisture absorption of 1.2 % | ASTM D570, Condition Dᵢ-24/23 |
Mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Compressive modulus | 23.0 °C | 2.93 MPa Show Supplier Material materials with Compressive modulus of 2.93 MPa | ASTM D695, Condition A |
Compressive strength | 23.0 °C | 206.84 MPa Show Supplier Material materials with Compressive strength of 206.84 MPa | ASTM D695, Condition A |
Hardness, Rockwell M | 23.0 °C | 100 [-] Show Supplier Material materials with Hardness, Rockwell M of 100 [-] | ASTM D785 |
Tensile strength | 23.0 °C | 68.95 MPa Show Supplier Material materials with Tensile strength of 68.95 MPa | ASTM D638, Condition A |
Thermal
| Property | Value | Comment | |
|---|---|---|---|
Relative temperature index, electrical | 125 °C Show Supplier Material materials with Relative temperature index, electrical of 125 °C | ¹ | |
Relative temperature index, mechanical strength | 125 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 125 °C | ¹ | |
Flammability | UL Bulletin 94, Class HB, Condition A | ||
Electrical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Dielectric strength | 23.0 °C | 7.48 kV/mm Show Supplier Material materials with Dielectric strength of 7.48 kV/mm | ASTM D149, Condition A |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Typical uses include retainers for ball-bearings and applications that require fine machining characteristics. | |
| Fillers | Cotton Fabric | |
| Other | 1.This temperature is a recommendation only, and based upon experience in various applications. The maximum operating temperature is dependent upon the application and should be investigated prior to use 2.The mechanical properties are converted from American unit system to International unit system. | |
| Supplier Disclaimer | This data, while believed to be accurate and based on reliable analytical methods, is for informational purposes only. The terms and conditions of the agreement under which it is sold will govern any sales of this product. Data supplied above are "typical values"; not to be considered "specification values". To assure the material's performance is adequate for a specific application; customers should verify, independent of Norplex-Micarta, performance characteristics of interest. It is the responsibility of the users of this information to make sure that they have the latest version of this TDB, and are urged to check with Customer Service or, preferably our web site, www.norplex-micarta.com, to determine if the information is the most current available. | |