Phenolic BP11NPN - Sheet

Alternative and trade names
U.L. LISTED: N
Want to keep this datasheet? Save it now in your required format

Description

BP11NPN is a canvas machining grade for structural and mechanical applications. It has better impact strength than phenolic paper grades.

Properties

General

Bonding strength

Fbond

1134 Kg at 23 °C

ASTM D229, Condition A

Density

ρ

1.37 g/cm³ at 23 °C

ASTM D792

Moisture absorption

cmoisture

3.5 % at 23 °C

ASTM D570, Condition Dᵢ-24/23

Mechanical

Compressive strength

Rmc

234.4 MPa at 23 °C

Show Thermoset Polymer Matrix Composite materials with Compressive strength of 234.4 MPa at 23 °C

ASTM D695, Condition A, Flatwise

Flexural modulus

Ebend

11 GPa at 23 °C

Show Thermoset Polymer Matrix Composite materials with Flexural modulus of 11 GPa at 23 °C

ASTM D790, Condition A

Flexural modulus, transverse

Ebend,trans

10.3 GPa at 23 °C

Show Thermoset Polymer Matrix Composite materials with Flexural modulus, transverse of 10.3 GPa at 23 °C

ASTM D790, Condition A

Flexural strength

σbend

124.1 MPa at 23 °C

Show Thermoset Polymer Matrix Composite materials with Flexural strength of 124.1 MPa at 23 °C

ASTM D790, Condition A

Flexural strength, transverse

σbendT

117.2 MPa at 23 °C

Show Thermoset Polymer Matrix Composite materials with Flexural strength, transverse of 117.2 MPa at 23 °C

ASTM D790, Condition A

Hardness, Rockwell M

HRM

100 [-] at 23 °C

Show Thermoset Polymer Matrix Composite materials with Hardness, Rockwell M of 100 [-] at 23 °C

ASTM D785

Impact strength, Izod unnotched, ASTM

IIzod,unnot,astm

165 J/m at 23 °C

Show Thermoset Polymer Matrix Composite materials with Impact strength, Izod unnotched, ASTM of 165 J/m at 23 °C

ASTM D256, Condition E-48/50

Impact strength, Izod unnotched, ASTM, Transversal

IIzod,unnot,astm,trans

144 J/m at 23 °C

Show Thermoset Polymer Matrix Composite materials with Impact strength, Izod unnotched, ASTM, Transversal of 144 J/m at 23 °C

ASTM D256, Condition E-48/50

Shear strength, transverse

τtrans

96.5 MPa at 23 °C

Show Thermoset Polymer Matrix Composite materials with Shear strength, transverse of 96.5 MPa at 23 °C

ASTM D732, Condition A

Tensile strength

Rm

82.7 MPa at 23 °C

Show Thermoset Polymer Matrix Composite materials with Tensile strength of 82.7 MPa at 23 °C

ASTM D638, Condition A

Tensile strength, transverse

Rm,trans

66.9 MPa at 23 °C

Show Thermoset Polymer Matrix Composite materials with Tensile strength, transverse of 66.9 MPa at 23 °C

ASTM D638, Condition A

Thermal

Arc resistance

15 seconds, ASTM D495, Condition A

Coefficient of thermal expansion

α

2E-5 1/K at 23 °C

IPC-TM 650-2.4.24

Coefficient of thermal expansion, transverse

αtrans

2.2E-5 1/K at 23 °C

IPC-TM 650-2.4.24

Flammability

UL Bulletin 94, Class HB, Condition A

Relative temperature index, electrical

RTIel

115 °C

UL Bulletin 746b¹

Relative temperature index, mechanical strength

RTIstr

125 °C

UL Bulletin 746b¹

Electrical

Breakdown voltage

Ubreak

5 - 20 kV at 23 °C

ASTM D149, Condition D48/50 (Min.) & A (Max.)

Comparative tracking index

CTI

155 V at 23 °C

ASTM D3638

Dielectric strength

EDS

5.91 - 15.75 kV/mm at 23 °C

ASTM D149, Condition D-48/50 (Min.) & A (Max.)

Technological properties

Application areas

Structural and mechanical applications

Fillers

Cotton Fabric

Other

1.This temperature is a recommendation only, and based upon experience in various applications. The maximum operating temperature is dependent upon the application and should be investigated prior to use

Primary Phase

Secondary Phase

Supplier Disclaimer

This data, while believed to be accurate and based on reliable analytical methods, is for informational purposes only. The terms and conditions of the agreement under which it is sold will govern any sales of this product. Data supplied above are "typical values"; not to be considered "specification values".


To assure the material's performance is adequate for a specific application; customers should verify, independent of Norplex-Micarta, performance characteristics of interest.


It is the responsibility of the users of this information to make sure that they have the latest version of this TDB, and are urged to check with Customer Service or, preferably our web site, www.norplex-micarta.com, to determine if the information is the most current available.

This material data has been provided by Norplex Micarta.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.