Phenolic RT628 - Tube

Alternative and trade names
NEMA GRADE: XX, U.L. LISTED: N
Want to keep this datasheet? Save it now in your required format

Description

Grade RT628 is an improved machining grade meeting NEMA XX for tubes. It has low moisture absorption and good dimensional stability. The primary application is in transformers.

This material data has been provided by Norplex Micarta.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

General

PropertyValueTesting StandardComment

Density

1.22 g/cm³

Show Supplier Material materials with Density of 1.22 g/cm³

ASTM D792

Moisture absorption

1.25 %

Show Supplier Material materials with Moisture absorption of 1.25 %

ASTM D570

Condition D₁-24/23

Mechanical

PropertyValueTesting StandardComment

Compressive modulus

3.0 GPa

Show Supplier Material materials with Compressive modulus of 3.0 GPa

ASTM D695

Condition A

Compressive strength

144.8 MPa

Show Supplier Material materials with Compressive strength of 144.8 MPa

ASTM D695

Condition A

Hardness, Rockwell M

80 [-]

Show Supplier Material materials with Hardness, Rockwell M of 80 [-]

ASTM D785

Tensile strength

100.0 MPa

Show Supplier Material materials with Tensile strength of 100.0 MPa

ASTM D638

Condition A

Thermal

PropertyValueComment

Relative temperature index, electrical

130 °C

Show Supplier Material materials with Relative temperature index, electrical of 130 °C

¹

Relative temperature index, mechanical strength

130 °C

Show Supplier Material materials with Relative temperature index, mechanical strength of 130 °C

¹

Flammability

UL Bulletin 94, Class HB, Condition A

Electrical

PropertyValueTesting StandardComment

Dielectric strength

7.87 kV/mm

Show Supplier Material materials with Dielectric strength of 7.87 kV/mm

ASTM D149

Condition D-48/50

15.74 kV/mm

Show Supplier Material materials with Dielectric strength of 15.74 kV/mm

ASTM D149

Condition A

Technological properties

Property
Application areas

Typical applications are as a replacement for RT629 where improved machining characteristics are needed.

Fillers

Paper

Other

1.This temperature is a recommendation only, and based upon experience in various applications. The maximum operating temperature is dependent upon the application and should be investigated prior to use


2.The mechanical properties are converted from American unit system to International unit system.

Supplier Disclaimer

This data, while believed to be accurate and based on reliable analytical methods, is for informational purposes only. The terms and conditions of the agreement under which it is sold will govern any sales of this product. Data supplied above are "typical values"; not to be considered "specification values".


To assure the material's performance is adequate for a specific application; customers should verify, independent of Norplex-Micarta, performance characteristics of interest.


It is the responsibility of the users of this information to make sure that they have the latest version of this TDB, and are urged to check with Customer Service or, preferably our web site, www.norplex-micarta.com, to determine if the information is the most current available.