Phenolic NP101 - Sheet
NEMA GRADE: N-1, U.L. LISTED: N
Description
Phenolic resin combined with spun nylon fabric. Good impact strength and excellent electrical properties under high humidity conditions.
Properties
General
Bonding strength
Fbond816.5 Kg at 23 °C
ASTM D229, Condition A
Density
ρ1.15 g/cm³ at 23 °C
ASTM D792
Moisture absorption
cmoisture0.3 % at 23 °C
ASTM D570, Condition D₁-24/23
Mechanical
Thermal
Arc resistance
80 seconds, ASTM D495, Condition A
Flammability
UL Bulletin 94, Class HB, Condition A
Relative temperature index, mechanical strength
RTIstr105 °C
UL Bulletin 746b¹
Electrical
Breakdown voltage
Ubreak45 - 65 kV at 23 °C
ASTM D149, Condition D48/50 (Min.) & A (Max.)
Comparative tracking index
CTI150 V at 23 °C
ASTM D3638
Dielectric constant, 1MHz
εr,1MHz3.75 [-] at 23 °C
ASTM D150, Condition D-24/23
Dielectric strength
EDS19.69 - 25.59 kV/mm at 23 °C
ASTM D149, Condition D-48/50 (Min.) & A (Max.)
Dissipation factor, 1MHz
ε''1MHz0.04 [-] at 23 °C
ASTM D150, Condition D-24/23
Technological properties
Fillers
Nylon
Other
1.This temperature is a recommendation only, and based upon experience in various applications. The maximum operating temperature is dependent upon the application and should be investigated prior to use
Primary Phase
Secondary Phase
Supplier Disclaimer
This data, while believed to be accurate and based on reliable analytical methods, is for informational purposes only. The terms and conditions of the agreement under which it is sold will govern any sales of this product. Data supplied above are "typical values"; not to be considered "specification values".
To assure the material's performance is adequate for a specific application; customers should verify, independent of Norplex-Micarta, performance characteristics of interest.
It is the responsibility of the users of this information to make sure that they have the latest version of this TDB, and are urged to check with Customer Service or, preferably our web site, www.norplex-micarta.com, to determine if the information is the most current available.
This material data has been provided by Norplex Micarta.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.