KetaSpire® PEEK CF10 LS1 AM Filament

Alternative and trade names
PEEK-CF10

Want to keep this datasheet? Save it now in your required format

Description

Ketaspire® CF10 LS1 AM Filament incorporates 10% carbon fiber reinforcement into a PEEK matrix for increased strength. This material provides long-term performance up to 240°C, including exceptional chemical resistance. These properties make it particularly suited for metal replacement in critical applications in severe end-use environments, such as Oil & Gas, Aerospace and Automotive.

This material data has been provided by Solvay Specialty Polymers.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Value	Comment
Density	1.33 g/cm³ Show Supplier Material materials with Density of 1.33 g/cm³	ASTM D792

Dimension

Property	Value
Diameter	1.75 mm Show Supplier Material materials with Diameter of 1.75 mm

Mechanical

Property	Value	Comment
Elastic modulus	11.0 GPa Show Supplier Material materials with Elastic modulus of 11.0 GPa	ASTM D638
Elongation	1.7000000000000002 % Show Supplier Material materials with Elongation of 1.7000000000000002 %	ASTM D638
Impact strength, Izod notched, ASTM	89.0 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 89.0 J/m	ASTM D256
Tensile strength	140.0 MPa Show Supplier Material materials with Tensile strength of 140.0 MPa	ASTM D638

Thermal

Property	Value	Comment
Melting point	343.0 °C Show Supplier Material materials with Melting point of 343.0 °C	ASTM D3418

Technological properties

Property
Application areas	Aerospace Applications, Automotive Applications, Oil/Gas Applications
Certifications	Substances used to manufacture the polymer grade used for this filament meets the requirements of Commission Regulation (EU) N°10/2011, which implements the framework regulation EU 1935/2004 as related to plastic materials and articles intended to come into contact with food and its subsequent amendments as well as the GMP requirements for EU 2023/2006. Please feel free to contact the supplier for RoHS Compliance.
Color	Black
Features	Chemical Resistant Ductile Flame Retardant Good Dimensional Stability Good Impact Resistance High Heat Resistance High Strength
Fillers	10% Carbon Fiber
Other	Test specimen parameters: First layer: 0.3mm thick Subsequent layers: 0.1mm 100% infill 3 shells Printing speed: 18 mm/s Note: Typical properties: these are not to be construed as specifications
Processing methods	Fused Filament Fabrication (FFF) Printing conditions for above data table: Filament drying conditions, minimum temperature 4h: 150°C Extruder temperature: 400-440°C Bed temperature: 180-220°C Printing tool path: 0°

KetaSpire® PEEK CF10 LS1 AM Filament

Description

Ashby charts

Applications

Materials by this supplier

Use cases

Properties