HIPS 3341

Alternative and trade names
3341, PS-I
Want to keep this datasheet? Save it now in your required format

Description

TPSC, Polystyrene Impact 3341 is a high ductility polystyrene for extrusion application. It offers good mechanical and thermal properties, that leads to manufacturing of thermoformed articles with good rigidity and toughness.

This material data has been provided by Toling Corporation Sdn Bhd .

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

General

PropertyValueTemperatureComment

Density

1.04 g/cm³

Show Supplier Material materials with Density of 1.04 g/cm³ at 23.0 °C

23.0 °C

ASTM D792

Water absorption

0.07 %

Show Supplier Material materials with Water absorption of 0.07 % at 23.0 °C

23.0 °C

ASTM D570

Mechanical

PropertyValueTemperatureComment

Elongation

45 %

Show Supplier Material materials with Elongation of 45 % at 23.0 °C

23.0 °C

ASTM D638

Flexural modulus

2.26 GPa

Show Supplier Material materials with Flexural modulus of 2.26 GPa at 23.0 °C

23.0 °C

ASTM D790

Hardness, Rockwell R

99 [-]

Show Supplier Material materials with Hardness, Rockwell R of 99 [-] at 23.0 °C

23.0 °C

ASTM D785

Impact strength, Izod unnotched

11.5 kJ/m²

Show Supplier Material materials with Impact strength, Izod unnotched of 11.5 kJ/m² at 23.0 °C

23.0 °C

ISO 180

Yield strength

45 MPa

Show Supplier Material materials with Yield strength of 45 MPa at 23.0 °C

23.0 °C

ASTM D638

Thermal

PropertyValueTemperatureComment

Coefficient of thermal expansion

9.05E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 9.05E-5 1/K at 23.0 °C

23.0 °C

ASTM D696

Heat deflection temperature, 1.80 MPa

80 °C

Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 80 °C

ASTM D648

Vicat softening temperature

80 °C

Show Supplier Material materials with Vicat softening temperature of 80 °C

ASTM D1525

Electrical

PropertyValueTemperatureComment

Dielectric strength

150 kV/mm

Show Supplier Material materials with Dielectric strength of 150 kV/mm at 23.0 °C

23.0 °C

ASTM D149

Surface resistivity

1.00E+13 Ω/sq

Show Supplier Material materials with Surface resistivity of 1.00E+13 Ω/sq at 23.0 °C

23.0 °C

IEC 93

Rheological Properties

PropertyValueComment

Melt mass-flow rate

3 g/10min

Show Supplier Material materials with Melt mass-flow rate of 3 g/10min

ASTM D1238

Technological properties

Property
Application areas

SHEET FOR THERMOFORMING, FOOD PACKAGING, ELECTRONIC PACKAGING