PC L-1225Y

Alternative and trade names
L-1225Y
Want to keep this datasheet? Save it now in your required format

Description

It is a thermoplastic resin suitable for injection molding, extrusion, blow molding that having the following features:


  • Good Mold Release
  • Ultra Low Viscosity
  • This material data has been provided by Toling Corporation Sdn Bhd .

    All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
    Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

    Ashby charts

    See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

    Properties

    General

    PropertyTemperatureValueComment

    Density

    23.0 °C

    1.2 g/cm³

    Show Supplier Material materials with Density of 1.2 g/cm³

    ISO 1183

    Mechanical

    PropertyTemperatureValueComment

    Elastic modulus

    23.0 °C

    2.4 GPa

    Show Supplier Material materials with Elastic modulus of 2.4 GPa

    ISO 527-2/1

    Elongation

    23.0 °C

    50 %

    Show Supplier Material materials with Elongation of 50 %

    ISO 527-2/50

    Elongation at yield

    23.0 °C

    6 %

    Show Supplier Material materials with Elongation at yield of 6 %

    ISO 527-2/50

    Flexural modulus

    23.0 °C

    2.35 GPa

    Show Supplier Material materials with Flexural modulus of 2.35 GPa

    ISO 178

    Flexural strength

    23.0 °C

    92 MPa

    Show Supplier Material materials with Flexural strength of 92 MPa

    ISO 178

    Impact strength, Charpy notched

    23.0 °C

    71 kJ/m²

    Show Supplier Material materials with Impact strength, Charpy notched of 71 kJ/m²

    ISO 179

    Yield strength

    23.0 °C

    62 MPa

    Show Supplier Material materials with Yield strength of 62 MPa

    ISO 527-2/50

    Impact strength, Charpy unnotched

    ISO 179, no break

    Thermal

    PropertyTemperatureValueComment

    Coefficient of thermal expansion

    23.0 °C

    7.5E-5 1/K

    Show Supplier Material materials with Coefficient of thermal expansion of 7.5E-5 1/K

    ISO 11359-2

    Heat deflection temperature, 0.45 MPa

    141 °C

    Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 141 °C

    ISO 75-2/B

    Heat deflection temperature, 1.80 MPa

    128 °C

    Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 128 °C

    ISO 75-2/A

    Relative temperature index, electrical

    125 °C

    Show Supplier Material materials with Relative temperature index, electrical of 125 °C

    UL 746

    Relative temperature index, mechanical impact

    115 °C

    Show Supplier Material materials with Relative temperature index, mechanical impact of 115 °C

    UL 746

    Relative temperature index, mechanical strength

    125 °C

    Show Supplier Material materials with Relative temperature index, mechanical strength of 125 °C

    UL 746

    Vicat softening temperature

    148 °C

    Show Supplier Material materials with Vicat softening temperature of 148 °C

    ISO 306/B50

    Flammability

    HB for 1.9mm and V-2 for 0.4mm UL94

    Electrical

    PropertyTemperatureValueComment

    Comparative tracking index

    23.0 °C

    250 V

    Show Supplier Material materials with Comparative tracking index of 250 V

    IEC 60112

    Dielectric constant, 100Hz

    23.0 °C

    3.1 [-]

    Show Supplier Material materials with Dielectric constant, 100Hz of 3.1 [-]

    IEC 60250

    Dielectric constant, 1MHz

    23.0 °C

    3 [-]

    Show Supplier Material materials with Dielectric constant, 1MHz of 3 [-]

    IEC 60250

    Dielectric strength

    23.0 °C

    30 kV/mm

    Show Supplier Material materials with Dielectric strength of 30 kV/mm

    IEC 60243-1

    Dissipation factor, 100Hz

    23.0 °C

    1E-3 [-]

    Show Supplier Material materials with Dissipation factor, 100Hz of 1E-3 [-]

    IEC 60250

    Dissipation factor, 1MHz

    23.0 °C

    9E-3 [-]

    Show Supplier Material materials with Dissipation factor, 1MHz of 9E-3 [-]

    IEC 60250

    Electrical resistivity

    23.0 °C

    1.00E+13 Ω·m

    Show Supplier Material materials with Electrical resistivity of 1.00E+13 Ω·m

    IEC 60093

    Surface resistivity

    23.0 °C

    1.00E+15 Ω/sq

    Show Supplier Material materials with Surface resistivity of 1.00E+15 Ω/sq

    IEC 60093

    Optical

    PropertyValueComment

    Refractive index

    1.59 [-]

    Show Supplier Material materials with Refractive index of 1.59 [-]

    ASTM D542

    Transmission

    88 %

    Show Supplier Material materials with Transmission of 88 %

    ASTM D1003 at 3000 μm

    Rheological Properties

    PropertyValueComment

    Melt mass-flow rate

    11 g/10min

    Show Supplier Material materials with Melt mass-flow rate of 11 g/10min

    ISO 1133

    Technological properties

    Property
    Application areas

    GENERAL PURPOSE