Stanyl® TE300

Want to keep this datasheet? Save it now in your required format

Description

Stanyl® is our high-performance polyamide 46 used for applications in automotive, E&E, gears and outdoor power equipments.
Stanyl® is a high performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear & friction and process flow qualities are required.
Because Stanyl retains its mechanical properties at high temperatures up to 220°C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP.

Datasheet URL:

Stanyl® TE300

Los datos sobre este material han sido proporcionados por DSM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Condition	Testing Standard	Comment
Absorción de agua	3.8 % Show Supplier Material materials with Absorción de agua of 3.8 %	dry	ISO 62	at 23°C after 24h
	13.5 % Show Supplier Material materials with Absorción de agua of 13.5 %	dry	Sim. to ISO 62
Densidad	1.18 g/cm³ Show Supplier Material materials with Densidad of 1.18 g/cm³	dry	ISO 1183
Moisture absorption	3.7 % Show Supplier Material materials with Moisture absorption of 3.7 %	dry	Sim. to ISO 62
Índice límite de óxigeno	27 % Show Supplier Material materials with Índice límite de óxigeno of 27 %	dry	ISO 4589-1/-2

Mecánica

Property	Temperature	Value	Condition	Thickness	Testing Standard
Elongación		35 % Show Supplier Material materials with Elongación of 35 %	dry	1 mm	ISO 527-1/-2
		40 % Show Supplier Material materials with Elongación of 40 %	dry		ISO 527-1/-2
		50 % Show Supplier Material materials with Elongación of 50 %	conditioned		ISO 527-1/-2
	120 °C	50 % Show Supplier Material materials with Elongación of 50 %	dry		ISO 527-1/-2
	160 °C	50 % Show Supplier Material materials with Elongación of 50 %	dry		ISO 527-1/-2
	180 °C	50 % Show Supplier Material materials with Elongación of 50 %	dry		ISO 527-1/-2
	200 °C	50 % Show Supplier Material materials with Elongación of 50 %	dry		ISO 527-1/-2
Elongation at yield		10 % Show Supplier Material materials with Elongation at yield of 10 %	dry		ISO 527-1/-2
		20 % Show Supplier Material materials with Elongation at yield of 20 %	conditioned		ISO 527-1/-2
Flexural yield strength		50 MPa Show Supplier Material materials with Flexural yield strength of 50 MPa	conditioned		ISO 178
		150 MPa Show Supplier Material materials with Flexural yield strength of 150 MPa	dry		ISO 178
	120 °C	50 MPa Show Supplier Material materials with Flexural yield strength of 50 MPa	dry		ISO 178
	160 °C	40 MPa Show Supplier Material materials with Flexural yield strength of 40 MPa	dry		ISO 178
Límite elástico		55.0 MPa Show Supplier Material materials with Límite elástico of 55.0 MPa	conditioned		ISO 527-1/-2
		100 MPa Show Supplier Material materials with Límite elástico of 100 MPa	dry		ISO 527-1/-2
	120 °C	50 MPa Show Supplier Material materials with Límite elástico of 50 MPa	dry		ISO 527-1/-2
	160 °C	40 MPa Show Supplier Material materials with Límite elástico of 40 MPa	dry		ISO 527-1/-2
	180 °C	35 MPa Show Supplier Material materials with Límite elástico of 35 MPa	dry		ISO 527-1/-2
	200 °C	30 MPa Show Supplier Material materials with Límite elástico of 30 MPa	dry		ISO 527-1/-2
Módulo de flexión		0.9 GPa Show Supplier Material materials with Módulo de flexión of 0.9 GPa	conditioned		ISO 178
		3 GPa Show Supplier Material materials with Módulo de flexión of 3 GPa	dry		ISO 178
	120 °C	0.8 GPa Show Supplier Material materials with Módulo de flexión of 0.8 GPa	dry		ISO 178
	160 °C	0.6 GPa Show Supplier Material materials with Módulo de flexión of 0.6 GPa	dry		ISO 178
Módulo elástico		1 GPa Show Supplier Material materials with Módulo elástico of 1 GPa	conditioned		ISO 527-1/-2
		3 GPa Show Supplier Material materials with Módulo elástico of 3 GPa	dry	1 mm	ISO 527-1/-2
		3.3 GPa Show Supplier Material materials with Módulo elástico of 3.3 GPa	dry		ISO 527-1/-2
	120 °C	0.8 GPa Show Supplier Material materials with Módulo elástico of 0.8 GPa	dry		ISO 527-1/-2
	160 °C	0.65 GPa Show Supplier Material materials with Módulo elástico of 0.65 GPa	dry		ISO 527-1/-2
	180 °C	0.6 GPa Show Supplier Material materials with Módulo elástico of 0.6 GPa	dry		ISO 527-1/-2
	200 °C	0.5 GPa Show Supplier Material materials with Módulo elástico of 0.5 GPa	dry		ISO 527-1/-2
Resistencia al choque, ensayo Charpy entallado	-30 °C	4 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 4 kJ/m²	dry, conditioned		ISO 179/1eA
	23 °C	10 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 10 kJ/m²	dry		ISO 179/1eA
	23 °C	35 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 35 kJ/m²	conditioned		ISO 179/1eA

Aplicaciones térmicas

Property	Value	Condition	Testing Standard	Thickness	Pressure	Comment
Coeficiente de dilatación térmica	8.5e-07 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 8.5e-07 1/K	dry	ISO 11359-1/-2			Parallel
	1.1e-06 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.1e-06 1/K	dry	ISO 11359-1/-2			Normal
Glow Wire Flammability Index	775 °C Show Supplier Material materials with Glow Wire Flammability Index of 775 °C	dry	IEC 60695-2-12	0.75 mm
	960 °C Show Supplier Material materials with Glow Wire Flammability Index of 960 °C	dry	IEC 60695-2-12	3 mm
Glow Wire Ignition Temperature	700 °C Show Supplier Material materials with Glow Wire Ignition Temperature of 700 °C	dry	IEC 60695-2-13	3 mm
	775 °C Show Supplier Material materials with Glow Wire Ignition Temperature of 775 °C	dry	IEC 60695-2-13	0.75 mm
Inflamabilidad	V-2	dry	IEC 60695-11-10	1.5 mm		UL recognition :Yes
Relative temperature index, electrical	130 °C Show Supplier Material materials with Relative temperature index, electrical of 130 °C	dry	UL746B	0.9 mm
Temperatura de flexión bajo carga	190 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 190 °C	dry	ISO 75-1/-2		2 MPa
	280 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 280 °C	dry	ISO 75-1/-2		0.45 MPa
Temperatura de fusión	295 °C Show Supplier Material materials with Temperatura de fusión of 295 °C	dry	ISO 11357-1/-3			10°C/min
Temperatura de reblandecimiento Vicat	290 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 290 °C	dry	ISO 306			50°C/h 50N
Temperatura de transición del vidrio	75 °C Show Supplier Material materials with Temperatura de transición del vidrio of 75 °C	dry	ISO 11357-1/-2			10°C/min

Eléctrico

Property	Value	Condition	Testing Standard	Comment
Constante dieléctrica	3.6 [-] Show Supplier Material materials with Constante dieléctrica of 3.6 [-]	dry	IEC 62631-2-1	1MHz
	4 [-] Show Supplier Material materials with Constante dieléctrica of 4 [-]	dry	IEC 62631-2-1	100Hz
	4.3 [-] Show Supplier Material materials with Constante dieléctrica of 4.3 [-]	conditioned	IEC 62631-2-1	1MHz
	13 [-] Show Supplier Material materials with Constante dieléctrica of 13 [-]	conditioned	IEC 62631-2-1	100Hz
Factor de disipación	70 [-] Show Supplier Material materials with Factor de disipación of 70 [-]	dry	IEC 62631-2-1	100Hz
	260 [-] Show Supplier Material materials with Factor de disipación of 260 [-]	dry	IEC 62631-2-1	1MHz
	1000 [-] Show Supplier Material materials with Factor de disipación of 1000 [-]	conditioned	IEC 62631-2-1	1MHz
	1400 [-] Show Supplier Material materials with Factor de disipación of 1400 [-]	conditioned	IEC 62631-2-1	100Hz
Rigidez dieléctrica	20 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 20 kV/mm	conditioned	IEC 60243-1
	25 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 25 kV/mm	dry	IEC 60243-1
Surface resistivity	1e+14 Ω/sq Show Supplier Material materials with Surface resistivity of 1e+14 Ω/sq	conditioned	IEC 62631-3-2
Volume resistivity	1e+10 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+10 Ω·cm	conditioned	IEC 62631-3-1
	1e+13 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+13 Ω·cm	dry	IEC 62631-3-1
Índice de seguimiento comparativo	600 V Show Supplier Material materials with Índice de seguimiento comparativo of 600 V	dry	IEC 60112

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Contracción	2 % Show Supplier Material materials with Contracción of 2 %	dry	Sim. to ISO 294-4	Parallel
	2 % Show Supplier Material materials with Contracción of 2 %	dry	Sim. to ISO 294-4	Normal
Spiral flow length	110	dry	-	1.0 mm 800 bar
	120	dry	-	1.0 mm 900 bar
	130	dry	-	1.0 mm 1000 bar
	60	dry	-	0.5mm 1200 bar
	70	dry	-	0.5mm 1600 bar
	90	dry	-	0.5mm 2000 bar
Viscosity number	175 cm³/gr Show Supplier Material materials with Viscosity number of 175 cm³/gr	dry	ISO 307, 1157, 1628

Technological properties

Property
Certifications	Yellow Card Available

Stanyl® TE300

Description

Ashby charts

Materiales de este proveedor

Propiedades