Stanyl® TW200F8

Nombres alternativos y comerciales
PA46-GF40

Want to keep this datasheet? Save it now in your required format

Description

Stanyl® is our high-performance polyamide 46 used for applications in automotive, E&E, gears and outdoor power equipments.
Stanyl® is a high performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear & friction and process flow qualities are required.
Because Stanyl retains its mechanical properties at high temperatures up to 220°C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP.

Datasheet URL:

Stanyl® TW200F8

Los datos sobre este material han sido proporcionados por DSM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Condition	Testing Standard	Comment
Absorción de agua	2.3 % Show Supplier Material materials with Absorción de agua of 2.3 %	dry	ISO 62	at 23°C after 24h
	8.1 % Show Supplier Material materials with Absorción de agua of 8.1 %	dry	Sim. to ISO 62
Densidad	1.51 g/cm³ Show Supplier Material materials with Densidad of 1.51 g/cm³	dry	ISO 1183
Moisture absorption	2.2 % Show Supplier Material materials with Moisture absorption of 2.2 %	dry	Sim. to ISO 62
Índice límite de óxigeno	22 % Show Supplier Material materials with Índice límite de óxigeno of 22 %	dry	ISO 4589-1/-2

Mecánica

Property	Temperature	Value	Condition	Testing Standard
Elongación		3.3 % Show Supplier Material materials with Elongación of 3.3 %	dry	ISO 527-1/-2
		6 % Show Supplier Material materials with Elongación of 6 %	conditioned	ISO 527-1/-2
	120 °C	6 % Show Supplier Material materials with Elongación of 6 %	dry	ISO 527-1/-2
	140 °C	6.5 % Show Supplier Material materials with Elongación of 6.5 %	dry	ISO 527-1/-2
	150 °C	7 % Show Supplier Material materials with Elongación of 7 %	dry	ISO 527-1/-2
	160 °C	7 % Show Supplier Material materials with Elongación of 7 %	dry	ISO 527-1/-2
	180 °C	7 % Show Supplier Material materials with Elongación of 7 %	dry	ISO 527-1/-2
	200 °C	8 % Show Supplier Material materials with Elongación of 8 %	dry	ISO 527-1/-2
	210 °C	0.008 % Show Supplier Material materials with Elongación of 0.008 %	dry	ISO 527-1/-2
Flexural yield strength		220 MPa Show Supplier Material materials with Flexural yield strength of 220 MPa	conditioned	ISO 178
		325 MPa Show Supplier Material materials with Flexural yield strength of 325 MPa	dry	ISO 178
	120 °C	170 MPa Show Supplier Material materials with Flexural yield strength of 170 MPa	dry	ISO 178
	160 °C	140 MPa Show Supplier Material materials with Flexural yield strength of 140 MPa	dry	ISO 178
	180 °C	8 MPa Show Supplier Material materials with Flexural yield strength of 8 MPa	dry	ISO 178
	200 °C	8 MPa Show Supplier Material materials with Flexural yield strength of 8 MPa	dry	ISO 178
Módulo de flexión		7 GPa Show Supplier Material materials with Módulo de flexión of 7 GPa	conditioned	ISO 178
		11.8 GPa Show Supplier Material materials with Módulo de flexión of 11.8 GPa	dry	ISO 178
	120 °C	5.8 GPa Show Supplier Material materials with Módulo de flexión of 5.8 GPa	dry	ISO 178
	160 °C	5.2 GPa Show Supplier Material materials with Módulo de flexión of 5.2 GPa	dry	ISO 178
Módulo elástico	-40 °C	13.2 GPa Show Supplier Material materials with Módulo elástico of 13.2 GPa	dry	ISO 527-1/-2
		8 GPa Show Supplier Material materials with Módulo elástico of 8 GPa	conditioned	ISO 527-1/-2
		13 GPa Show Supplier Material materials with Módulo elástico of 13 GPa	dry	ISO 527-1/-2
	100 °C	7.7 GPa Show Supplier Material materials with Módulo elástico of 7.7 GPa	dry	ISO 527-1/-2
	120 °C	6.9 GPa Show Supplier Material materials with Módulo elástico of 6.9 GPa	dry	ISO 527-1/-2
	140 °C	6.5 GPa Show Supplier Material materials with Módulo elástico of 6.5 GPa	dry	ISO 527-1/-2
	150 °C	6.3 GPa Show Supplier Material materials with Módulo elástico of 6.3 GPa	dry	ISO 527-1/-2
	160 °C	6.1 GPa Show Supplier Material materials with Módulo elástico of 6.1 GPa	dry	ISO 527-1/-2
	180 °C	5.6 GPa Show Supplier Material materials with Módulo elástico of 5.6 GPa	dry	ISO 527-1/-2
	200 °C	5.2 GPa Show Supplier Material materials with Módulo elástico of 5.2 GPa	dry	ISO 527-1/-2
	210 °C	5 GPa Show Supplier Material materials with Módulo elástico of 5 GPa	dry	ISO 527-1/-2
Resistencia a la tracción	-40 °C	285 MPa Show Supplier Material materials with Resistencia a la tracción of 285 MPa	dry	ISO 527-1/-2
		140 MPa Show Supplier Material materials with Resistencia a la tracción of 140 MPa	conditioned	ISO 527-1/-2
		235 MPa Show Supplier Material materials with Resistencia a la tracción of 235 MPa	dry	ISO 527-1/-2
	100 °C	140 MPa Show Supplier Material materials with Resistencia a la tracción of 140 MPa	dry	ISO 527-1/-2
	120 °C	130 MPa Show Supplier Material materials with Resistencia a la tracción of 130 MPa	dry	ISO 527-1/-2
	140 °C	125 MPa Show Supplier Material materials with Resistencia a la tracción of 125 MPa	dry	ISO 527-1/-2
	150 °C	120 MPa Show Supplier Material materials with Resistencia a la tracción of 120 MPa	dry	ISO 527-1/-2
	160 °C	115 MPa Show Supplier Material materials with Resistencia a la tracción of 115 MPa	dry	ISO 527-1/-2
	180 °C	105 MPa Show Supplier Material materials with Resistencia a la tracción of 105 MPa	dry	ISO 527-1/-2
	200 °C	100 MPa Show Supplier Material materials with Resistencia a la tracción of 100 MPa	dry	ISO 527-1/-2
	210 °C	95 MPa Show Supplier Material materials with Resistencia a la tracción of 95 MPa	dry	ISO 527-1/-2
Resistencia al choque, ensayo Charpy entallado	-30 °C	12 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 12 kJ/m²	dry, conditioned	ISO 179/1eA
	23 °C	14.0 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 14.0 kJ/m²	dry	ISO 179/1eA
	23 °C	21 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 21 kJ/m²	conditioned	ISO 179/1eA
Resistencia al choque, ensayo Charpy no entallado	-30 °C	75 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 75 kJ/m²	dry	ISO 179/1eU
	-30 °C	85 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 85 kJ/m²	conditioned	ISO 179/1eU
	23 °C	95 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 95 kJ/m²	dry	ISO 179/1eU
	23 °C	100 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 100 kJ/m²	conditioned	ISO 179/1eU

Aplicaciones térmicas

Property	Value	Condition	Testing Standard	Thickness	Pressure	Comment
Coeficiente de dilatación térmica	2.5e-07 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 2.5e-07 1/K	dry	ISO 11359-1/-2			Parallel
	5e-07 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 5e-07 1/K	dry	ISO 11359-1/-2			Normal
Difusividad térmica	1.36e-07 mm²/s Show Supplier Material materials with Difusividad térmica of 1.36e-07 mm²/s	dry	-
Inflamabilidad	HB	dry	IEC 60695-11-10	1.5 mm		UL recognition :Yes
Relative temperature index, electrical	65 °C Show Supplier Material materials with Relative temperature index, electrical of 65 °C	dry	UL746B	2 mm
Relative temperature index, mechanical impact	65 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 65 °C	dry	UL746B	2 mm
Relative temperature index, mechanical strength	65 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 65 °C	dry	UL746B	2 mm
Temperatura de flexión bajo carga	290 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 290 °C	dry	ISO 75-1/-2		2 MPa
	290 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 290 °C	dry	ISO 75-1/-2		0.45 MPa
Temperatura de fusión	295 °C Show Supplier Material materials with Temperatura de fusión of 295 °C	dry	ISO 11357-1/-3			10°C/min
Temperatura de reblandecimiento Vicat	290 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 290 °C	dry	ISO 306			50°C/h 50N
Temperatura de transición del vidrio	75 °C Show Supplier Material materials with Temperatura de transición del vidrio of 75 °C	dry	ISO 11357-1/-2			10°C/min

Eléctrico

Property	Value	Condition	Testing Standard	Comment
Constante dieléctrica	4 [-] Show Supplier Material materials with Constante dieléctrica of 4 [-]	dry	IEC 62631-2-1	1MHz
	4.3 [-] Show Supplier Material materials with Constante dieléctrica of 4.3 [-]	dry	IEC 62631-2-1	100Hz
	4.7 [-] Show Supplier Material materials with Constante dieléctrica of 4.7 [-]	conditioned	IEC 62631-2-1	1MHz
	16 [-] Show Supplier Material materials with Constante dieléctrica of 16 [-]	conditioned	IEC 62631-2-1	100Hz
Factor de disipación	70 [-] Show Supplier Material materials with Factor de disipación of 70 [-]	dry	IEC 62631-2-1	100Hz
	200 [-] Show Supplier Material materials with Factor de disipación of 200 [-]	dry	IEC 62631-2-1	1MHz
	1000 [-] Show Supplier Material materials with Factor de disipación of 1000 [-]	conditioned	IEC 62631-2-1	1MHz
	6000 [-] Show Supplier Material materials with Factor de disipación of 6000 [-]	conditioned	IEC 62631-2-1	100Hz
Rigidez dieléctrica	20 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 20 kV/mm	conditioned	IEC 60243-1
	30 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 30 kV/mm	dry	IEC 60243-1
Surface resistivity	1e+13 Ω/sq Show Supplier Material materials with Surface resistivity of 1e+13 Ω/sq	conditioned	IEC 62631-3-2
Volume resistivity	1e+08 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+08 Ω·cm	conditioned	IEC 62631-3-1
	1e+12 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+12 Ω·cm	dry	IEC 62631-3-1
Índice de seguimiento comparativo	300 V Show Supplier Material materials with Índice de seguimiento comparativo of 300 V	dry	IEC 60112

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Contracción	0.5 % Show Supplier Material materials with Contracción of 0.5 %	dry	Sim. to ISO 294-4	Parallel
	1.1 % Show Supplier Material materials with Contracción of 1.1 %	dry	Sim. to ISO 294-4	Normal
Density of melt	1320 g/cm³ Show Supplier Material materials with Density of melt of 1320 g/cm³	dry	-
Specific heat capacity melt	1930 J/(kg·K) Show Supplier Material materials with Specific heat capacity melt of 1930 J/(kg·K)	dry	-
Spiral flow length	80	dry	-	1.0 mm 800 bar
	90	dry	-	1.0 mm 900 bar
	100	dry	-	1.0 mm 1000 bar
Thermal conductivity of melt	0.344 W/(m·K) Show Supplier Material materials with Thermal conductivity of melt of 0.344 W/(m·K)	dry	-
Viscosity number	145 cm³/gr Show Supplier Material materials with Viscosity number of 145 cm³/gr	dry	ISO 307, 1157, 1628

Technological properties

Property
Application areas	Hot Charged Air Ducts, Charge Air Cooler Caps, Endlaminates (electro motors), Brushholders (electro motors), Coil insulation, Automotive e-motor Bobbins, EGR sensor, Start/Stop: Alternator and Starter parts
Certifications	Yellow Card Available
Fillers	40% Glass Fiber

Stanyl® TW200F8

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades