General
Property | Value | Temperature |
---|---|---|
Density | 2.68 - 2.69 g/cm³ Show Material materials with Density of 2.68 - 2.69 g/cm³ at 23.0 °C | 23.0 °C |
Dimension
Property | Value |
---|---|
Thickness | 0.2 - 6 mm Show Material materials with Thickness of 0.2 - 6 mm |
Mechanical
Property | Value | Temperature | Comment |
---|---|---|---|
Bending angle 180° | 0 °/t Show Material materials with Bending angle 180° of 0 °/t at 23.0 °C | 23.0 °C | |
Bending angle 90° | 0 - 2.5 °/t Show Material materials with Bending angle 90° of 0 - 2.5 °/t at 23.0 °C | 23.0 °C | |
Elastic modulus | 68.6 - 70 GPa Show Material materials with Elastic modulus of 68.6 - 70 GPa at 23.0 °C | 23.0 °C | |
Elongation A50 | 1 - 2 % Show Material materials with Elongation A50 of 1 - 2 % at 20.0 °C | 20.0 °C | |
1 - 2 % Show Material materials with Elongation A50 of 1 - 2 % at 23.0 °C | 23.0 °C | ||
Elongation A50, transverse | 1 - 2 % Show Material materials with Elongation A50, transverse of 1 - 2 % at 20.0 °C | 20.0 °C | |
Hardness, Brinell | 68 [-] Show Material materials with Hardness, Brinell of 68 [-] at 20.0 °C | 20.0 °C | |
68 [-] Show Material materials with Hardness, Brinell of 68 [-] at 23.0 °C | 23.0 °C | ||
Hardness, HBW | 68 [-] Show Material materials with Hardness, HBW of 68 [-] at 23.0 °C | 23.0 °C | |
Plane-Strain Fracture Toughnes | 22 - 35 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22 - 35 MPa·√m at 23.0 °C | 23.0 °C | Typical for Wrought 5000 Series Aluminium |
Poisson's ratio | 0.33 [-] Show Material materials with Poisson's ratio of 0.33 [-] at 23.0 °C | 23.0 °C | Typical for Wrought 5000 Series Aluminium |
Shear modulus | 26.5 GPa Show Material materials with Shear modulus of 26.5 GPa at 23.0 °C | 23.0 °C | |
Tensile strength | 220 MPa Show Material materials with Tensile strength of 220 MPa at 20.0 °C | 20.0 °C | |
220 MPa Show Material materials with Tensile strength of 220 MPa at 23.0 °C | 23.0 °C | ||
Tensile strength, transverse | 220 MPa Show Material materials with Tensile strength, transverse of 220 MPa at 20.0 °C | 20.0 °C | |
Yield strength | 190 MPa Show Material materials with Yield strength of 190 MPa at 23.0 °C | 23.0 °C | |
Yield strength Rp0.2 | 190 MPa Show Material materials with Yield strength Rp0.2 of 190 MPa at 20.0 °C | 20.0 °C | |
190 MPa Show Material materials with Yield strength Rp0.2 of 190 MPa at 23.0 °C | 23.0 °C | ||
Yield strength Rp0.2, transverse | 190 MPa Show Material materials with Yield strength Rp0.2, transverse of 190 MPa at 20.0 °C | 20.0 °C |
Thermal
Property | Value | Temperature | Comment |
---|---|---|---|
Coefficient of thermal expansion | 2.38E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.38E-5 1/K at 20.0 °C | 20.0 °C | 20-100°C |
2.38E-5 - 2.4E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.38E-5 - 2.4E-5 1/K at 100.0 °C | 100.0 °C | 20-100°C | |
Max service temperature | 150 °C Show Material materials with Max service temperature of 150 °C | Typical for Wrought 5000 Series Aluminium | |
Melting point | 620 - 650 °C Show Material materials with Melting point of 620 - 650 °C | ||
Specific heat capacity | 879 - 963 J/(kg·K) Show Material materials with Specific heat capacity of 879 - 963 J/(kg·K) at 23.0 °C | 23.0 °C | Typical for Wrought 5000 Series Aluminium |
Thermal conductivity | 170 - 193 W/(m·K) Show Material materials with Thermal conductivity of 170 - 193 W/(m·K) at 23.0 °C | 23.0 °C |
Electrical
Property | Value | Temperature |
---|---|---|
Electrical conductivity | 2.30E+7 - 2.90E+7 S/m Show Material materials with Electrical conductivity of 2.30E+7 - 2.90E+7 S/m at 23.0 °C | 23.0 °C |
Electrical resistivity | 3.4E-8 - 4.35E-8 Ω·m Show Material materials with Electrical resistivity of 3.4E-8 - 4.35E-8 Ω·m at 23.0 °C | 23.0 °C |
Chemical properties
Property | ||
---|---|---|
Chromium | 0.1 % | |
Copper | 0.2 % | |
Iron | 0.7 % | |
Magnesium | 1.1 - 1.8 % | |
Manganese | 0.1 - 0.3 % | |
Other | each 0.05, total 0.10, Rest Al | |
Silicon | 0.4 % | |
Zinc | 0.25 % |
Technological properties
Property | ||
---|---|---|
Anodizing | Very Good (anodizing quality) | |
Application areas | Roofing: Single sheet, Sheets for composites/ sandwich Panels; Interiors and ceilings: Single sheet, Sheets for composites/ sandwich Panels, Sheets for mechanized panels, Decoration; Anodizing quality; Tubes: Industrial tubes, Pipes; Food can: Body, Lids | |
Brazing | Good | |
Corrosion properties | Excellent | |
General machinability | Fair | |
Welding | Excellent | |
Workability | Very Good |