EN 573-3 Grade AW-5052 H44

Want to keep this datasheet? Save it now in your required format

Description

Material EN AW-Al Mg2,5 is produced for sheet metals, strip and plates, for extruded and drawn components, for wire and prewire for mechanical applications, as well as for prematerial for cans, caps and stoppers. The material is food-safe and is used for HF-welded tubes. To the comparable mark AlMg2,5, material No. 3.3523 acc. to DIN 1725-1 : 1983-02 applies: The alloy has a high resistance to corrosion, seawater and salted atmosphere. Strength increases and cold workability decreases according to the Mg-content. It is naturally hard, i.e. a strength increase can only be achieved by cold forming, not by controlled heat treatment. It is well brightenable and anodizable. Machinability and weldability are enhanced by increasing Mg-content. The material is used for staticly not overly loaded components. The weldability is enhanced due to the available Mg-content (>=2,5 %), but the extrusion is more complicated. Application: in packaging industry for tear open lids, stopper of all kind, beverage cans. For transport container , for signs (esp. in traffic), in construction trade for load-carrying constructions, for shutter, roll-up doors, for roofs and facade lining. In apparatus engineering for tanks (tanks for temp. up to 250°C) and pipelines, in vehicle manufacturing for coachbuilding, in aircraft construction for tanks, Honeycomb-constructions and tubes as well as for connecting elements (blind rivets, clinch nuts). Material comparison for US grades (sequel to the material recoding): 5052: ASTM B 275, ASTM B 404, ASTM B 548, ASTM B 745, ASTM B 746, ASTM B 864, ASTM F 626, ASTM F 782, ASTM F 993 UNS A 95052: AMS 4114, AMS 4178, AMS 4348, AMS-A-81596, AMS-QQ-A-225/7, AMS-QQ-A-250/8, MIL-G-18014

Related Standards

Equivalent Materials

This material data has been provided by WIAM,AluKey.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValue

Density

20.0 °C

2.68 - 2.69 g/cm³

Show Material materials with Density of 2.68 - 2.69 g/cm³

23.0 °C

2.68 g/cm³

Show Material materials with Density of 2.68 g/cm³

Mechanical

PropertyTemperatureValueComment

Bending Fatigue Strength

23.0 °C

120 MPa

Show Material materials with Bending Fatigue Strength of 120 MPa

Elastic modulus

20.0 °C

70 GPa

Show Material materials with Elastic modulus of 70 GPa

23.0 °C

70 GPa

Show Material materials with Elastic modulus of 70 GPa

Unlock all property charts

Elongation A50

20.0 °C

4 - 6 %

Show Material materials with Elongation A50 of 4 - 6 %

23.0 °C

4 - 7 %

Show Material materials with Elongation A50 of 4 - 7 %

Unlock all property charts

Elongation A50, transverse

20.0 °C

4 - 6 %

Show Material materials with Elongation A50, transverse of 4 - 6 %

Plane-Strain Fracture Toughnes

23.0 °C

22 - 35 MPa·√m

Show Material materials with Plane-Strain Fracture Toughnes of 22 - 35 MPa·√m

Typical for Wrought 5000 Series Aluminium

Poisson's ratio

20.0 °C

0.33 [-]

Show Material materials with Poisson's ratio of 0.33 [-]

Shear modulus

20.0 °C

26.3 - 27 GPa

Show Material materials with Shear modulus of 26.3 - 27 GPa

23.0 °C

26.3 GPa

Show Material materials with Shear modulus of 26.3 GPa

Unlock all property charts

Tensile strength

20.0 °C

230 - 280 MPa

Show Material materials with Tensile strength of 230 - 280 MPa

23.0 °C

215 - 280 MPa

Show Material materials with Tensile strength of 215 - 280 MPa

Unlock all property charts

Tensile strength, transverse

20.0 °C

230 - 280 MPa

Show Material materials with Tensile strength, transverse of 230 - 280 MPa

Yield strength Rp0.2

20.0 °C

150 - 240 MPa

Show Material materials with Yield strength Rp0.2 of 150 - 240 MPa

23.0 °C

150 - 240 MPa

Show Material materials with Yield strength Rp0.2 of 150 - 240 MPa

Unlock all property charts

Yield strength Rp0.2, transverse

20.0 °C

150 MPa

Show Material materials with Yield strength Rp0.2, transverse of 150 MPa

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

-50.0 °C

2.21E-5 1/K

Show Material materials with Coefficient of thermal expansion of 2.21E-5 1/K

20.0 °C

2.21E-5 - 2.57E-5 1/K

Show Material materials with Coefficient of thermal expansion of 2.21E-5 - 2.57E-5 1/K

100.0 °C

2.38E-5 1/K

Show Material materials with Coefficient of thermal expansion of 2.38E-5 1/K

200.0 °C

2.48E-5 1/K

Show Material materials with Coefficient of thermal expansion of 2.48E-5 1/K

300.0 °C

2.57E-5 1/K

Show Material materials with Coefficient of thermal expansion of 2.57E-5 1/K

Unlock all property charts

Max service temperature

150 °C

Show Material materials with Max service temperature of 150 °C

Typical for Wrought 5000 Series Aluminium

Melting point

605 - 650 °C

Show Material materials with Melting point of 605 - 650 °C

Specific heat capacity

20.0 °C

900 - 901 J/(kg·K)

Show Material materials with Specific heat capacity of 900 - 901 J/(kg·K)

23.0 °C

900 J/(kg·K)

Show Material materials with Specific heat capacity of 900 J/(kg·K)

Unlock all property charts

Thermal conductivity

20.0 °C

130 - 150 W/(m·K)

Show Material materials with Thermal conductivity of 130 - 150 W/(m·K)

23.0 °C

130 - 150 W/(m·K)

Show Material materials with Thermal conductivity of 130 - 150 W/(m·K)

Unlock all property charts

Electrical

PropertyTemperatureValue

Electrical conductivity

20.0 °C

1.90E+7 - 2.10E+7 S/m

Show Material materials with Electrical conductivity of 1.90E+7 - 2.10E+7 S/m

23.0 °C

1.90E+7 - 2.10E+7 S/m

Show Material materials with Electrical conductivity of 1.90E+7 - 2.10E+7 S/m

Unlock all property charts

Electrical resistivity

20.0 °C

4.7E-8 - 5.2E-8 Ω·m

Show Material materials with Electrical resistivity of 4.7E-8 - 5.2E-8 Ω·m

23.0 °C

4.76E-8 - 5.26E-8 Ω·m

Show Material materials with Electrical resistivity of 4.76E-8 - 5.26E-8 Ω·m

Unlock all property charts

Chemical properties

PropertyValue

Chromium

0.15 - 0.35 %

Show Material materials with Chromium of 0.15 - 0.35 %

Copper

0.1 %

Show Material materials with Copper of 0.1 %

Iron

0.4 %

Show Material materials with Iron of 0.4 %

Magnesium

2.2 - 2.8 %

Show Material materials with Magnesium of 2.2 - 2.8 %

Manganese

0.1 %

Show Material materials with Manganese of 0.1 %

Other

each 0.05, total 0.15, Rest Al

Silicon

0.25 %

Show Material materials with Silicon of 0.25 %

Zinc

0.1 %

Show Material materials with Zinc of 0.1 %

Technological properties

Property
Anodizing

decorative: good, Protective: very good

Corrosion properties

Seawater: very good to good, weathering: good

Workability

Bending / Spinning (cold): very good / acceptable, Impact extrusion (cold): acceptable, Deep drawing / upsetting (Condition) good (O) / good (H12)